Turnigy 9x programming software for computer?

[mfische]

Hi, I just got the Turnigy 9x transmitter, and I am so used to my old transmitter that had a software that I used on my laptop that I could go into my transmitter and change the throttle curve, pitch curve...etc for my RC heli. So far, from what I see, the Turnigy 9x can only be programmed via its already set up heli packages that you pick on the menu of the transmitter. what if I want to play around with the pitch and throttle curve?

Does anybody know if there is a software that I can hookup my Turnigy 9x to and play around with the rc heli stuff like throttle curve and pitch curve?

[Rob Thomson]

If you upgrade from the stock firmware to either er9x or open9x you can

[man-bis]

Does anybody know if there is a software that I can hookup my Turnigy 9x to and play around with the rc heli stuff like throttle curve and pitch curve?

You need a lot of reading the wiki. You will find all the answers.

[Rob Thomson]

http://openrcforums.com/wiki

[sgofferj]

Or do it like me - just buy a smartieparts board, install it, get companion9x, throw open9x on the TX and start fidling .

[Helle]

Hy,

install companion9x and open9x or er9x and you can do it

Helle