Add 3 pos switches to plain 9x.

[MikeB]

By displaying the splash screen half size (the image was half size but I scaled it up for display) I've saved enough flash to fix the 3-pos switch problem.
Some of the '64 versions have a limited hardware menu (e.g. serial voice) that doesn't support setting the additional 3-pos switches.

I've posted a test version with this fix in.

Mike

[Rad]

By displaying the splash screen half size (the image was half size but I scaled it up for display) I've saved enough flash to fix the 3-pos switch problem.
Some of the '64 versions have a limited hardware menu (e.g. serial voice) that doesn't support setting the additional 3-pos switches.

I've posted a test version with this fix in.

Mike

Aaaaaaaaand that did it! Thanks, as always.

[Rad]

Flash question related with the three pos switch,

Captura de pantalla 2024-11-02 091631.png (27.42 KiB) Viewed 1660 times

Do you know if it is possible to set AIL middle as a default position with EEPE? Not sure if I have to write something under AIL or not, or if that is even possible. I am talking about the M64 version, no issues with Ersky for example.

Thanks!

[MikeB]

I'm working on this. Default switches should not be on that screen, they have been model specific for a long time.

Mike

[Rad]

I'm working on this. Default switches should not be on that screen, they have been model specific for a long time.

Mike

Correct, and that is how I use them, on every one of my models.
But the case of this M64 radio is a bit different. It is not mine but from a good friend of mine, and the main "issue" is if he creates new models he will have the issue of the switch alarm, and maybe at the beginning it could make the things easier to tell him to have all the switches in a certain way.

But yep, it is a specific case, so I dont want to take your time for that, you already accomplished too many wishes in the past

[MikeB]

I've just posted an update to eepe (just the .exe, built with QT5). Copy this to your existing eepe directory (rename the existing eepe.exe first in case there are any problems and you need to revert).

This removes the default switches in the general edit and handles added, 3-pos switches in the models.

Mike