FRSKY X9D 2019 receiver recommendation

[slinnings]

Hi,

I have just purchased a new X9D 2019 SE and are struggeling to bind with receivers that I have. For eample the FRSKY X6R receiver is not binding....

If you have experience with this Transmitter, please recommend receivers that is working with this model.

Thansk,
Rune

[MikeB]

The X9D 2019 uses ACCESS protocol by default. You may change this to D16 to bind the older receivers (like the X6R), bu the 2019 version uses V2 protocol. You need to make sure the X6R is running V2 firmware as well (or better use UNI firmware that binds to any D16 protocol).
You also need to check if the Tx is using FCC or EU and make sure the X6R is also using the same.

Mike