I was able to acquire a Bridgeport Milling Machine,
which has a 3 phase 1HP motor.
I only have 1 phase (230v) power to use for this motor.
So in my research I found that everyone today is using a Variable Frequency Drive.
Was suggested to me that I purchase larger capacity VFD then what is needed.
So today I received the,
VEVOR VFD 7.5KW 220V 10HP, 1 or 3 Phase Input, 3 Phase Output Variable Frequency Drive,
AC 33A 0~1000HZ CNC Motor Inverter Converter for Motor Speed.
https://www.vevor.com/variable-frequenc ... 0647304720
Looking over the 110 pages of the PDF Manual,
I am feeling somewhat lost with much of the setting options and what changes I may need to do.
Here is the PDF Manual download: https://d2v0huudrf11kh.cloudfront.net/v ... 589767.pdf
I know the first item to change is the 50Hz to 60Hz setting in the VFD.
This motor can run 50Hz or 60Hz and my input power is 60Hz, so I will change the setting parameter F005 to 60,
and setting parameter F004 to 60 and set parameter setting F003 to 60.
Here is the Bridgeport Milling Machine Motor info: 3phase, 60Hz, 1hp, 230V, 1730 rpm, 3.5A
I would appreciate any help getting the setting changes that need to be done to run this 3 phase 1HP motor.
![Smile :)](./images/smilies/icon_e_smile.gif)