Does ELRS module work fully with 9xr pro?
Does ELRS module work fully with 9xr pro?
Hello all, I hope everyone is doing well. I flashed ersky9xr revision 223 to the turnigy 9xr pro, and am wondering if an ELRS module will work at its full potential and baud rate with the 9xr pro? Also, will I be able to set the rf output power? Thanks in advance.
- MikeB
- 9x Developer
- Posts: 18051
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Does ELRS module work fully with 9xr pro?
I believe it is fully functional, however I only have a single ELRS module, and that is in "Lite" format, so I cannot test it in the 'PRO. The hardware of the 'PRO does support Crossfire and ELRS.
There is a script available for configuring the ELRS module, so all settings should be available.
My module and script work fine on transmitters with a 'Lite" module bay.
I haven't put V3 of the ELRS firmware on the module, I don't actually use ELRS, so I do rely on others to test it.
Mike
There is a script available for configuring the ELRS module, so all settings should be available.
My module and script work fine on transmitters with a 'Lite" module bay.
I haven't put V3 of the ELRS firmware on the module, I don't actually use ELRS, so I do rely on others to test it.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Does ELRS module work fully with 9xr pro?
Hello Mike, thanks a lot for the reply. Where can I find the scripts? Is it on the ELRS website or somewhere else? And by saying that the hardware of the pro does support elrs and crossfire, does it mean the module should theoretically work on full power? Sorry for all the questions, I'm quite new to all this, but I know that some transmitters does not support crossfire and elrs, and just want to make sure that I understand you correctly. Once more, thanks a lot.MikeB wrote: ↑Sun Oct 23, 2022 9:17 am I believe it is fully functional, however I only have a single ELRS module, and that is in "Lite" format, so I cannot test it in the 'PRO. The hardware of the 'PRO does support Crossfire and ELRS.
There is a script available for configuring the ELRS module, so all settings should be available.
My module and script work fine on transmitters with a 'Lite" module bay.
I haven't put V3 of the ELRS firmware on the module, I don't actually use ELRS, so I do rely on others to test it.
Mike
- MikeB
- 9x Developer
- Posts: 18051
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Does ELRS module work fully with 9xr pro?
Scripts are here: viewtopic.php?f=7&t=10668.
I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it.
Mike
I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Does ELRS module work fully with 9xr pro?
Hello, thanks a lot for the reply, I really appreciate all the help. God blessMikeB wrote: ↑Sun Oct 23, 2022 9:45 am Scripts are here: viewtopic.php?f=7&t=10668.
I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it.
Mike
Re: Does ELRS module work fully with 9xr pro?
Hello, sorry to bother you again. Just want to know if a crossfire module will work with the 9xr pro at full power? And if there are also any scripts I should load for the crossfire module to work? Thanks again for all the help, I truly appreciate it.MikeB wrote: ↑Sun Oct 23, 2022 9:45 am Scripts are here: viewtopic.php?f=7&t=10668.
I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it.
Mike
Re: Does ELRS module work fully with 9xr pro?
It should at 400k.Brochovy wrote: ↑Sun Oct 23, 2022 5:37 pmHello, sorry to bother you again. Just want to know if a crossfire module will work with the 9xr pro at full power? And if there are also any scripts I should load for the crossfire module to work? Thanks again for all the help, I truly appreciate it.MikeB wrote: ↑Sun Oct 23, 2022 9:45 am Scripts are here: viewtopic.php?f=7&t=10668.
I assume the module will work at full power, but I cannot test it myself. The script did allow setting the power when I tried it.
Mike
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
Re: Does ELRS module work fully with 9xr pro?
Yep I have it up and running. Works like a charm
Re: Does ELRS module work fully with 9xr pro?
I had to put a dc/dc converter between battery and supply for elrs fpvbeta Tx
-
- Posts: 25
- Joined: Tue Mar 22, 2016 12:32 am
- Country: -
Re: Does ELRS module work fully with 9xr pro?
I am trying to use a ELSR V3 module (ES24TX), I don't see any scripts there that address. Which should I use?
- MikeB
- 9x Developer
- Posts: 18051
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Does ELRS module work fully with 9xr pro?
Please start by trying the ELRSv2 script. I don't use ELRS, but I understand ELRS sends required options to the script that then just displays it.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!