MasterRadio TX16S

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
phil
Posts: 119
Joined: Thu Jan 14, 2016 7:03 am
Country: Germany
Location: München
Contact:

Re: MasterRadio TX16S

Post by phil »

binden Flyky2a und Flyky ohne Probleme

skyblue
Posts: 45
Joined: Wed Mar 09, 2016 3:28 pm
Country: -

Re: MasterRadio TX16S

Post by skyblue »

Hi Mike,
The bind in R233B5(with the same settings) was working well but it was not in R224p10 and R224p12.
User avatar
MikeB
9x Developer
Posts: 18030
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: MasterRadio TX16S

Post by MikeB »

I'm not sure what the problem might be. I don't have any Flysky2A receivers to test with, but I tested an original Flysky receiver and that binds and a DSMX receiver also binds correctly with the Tx seeing the DSM bind response. So I believe communication with the MPM is working correctly. I currently have 1.3.2.77 on my internal MPM.
Do other protocols bind?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
skyblue
Posts: 45
Joined: Wed Mar 09, 2016 3:28 pm
Country: -

Re: MasterRadio TX16S

Post by skyblue »

Hi Mike,
The bind in R233B5 was working well as the two vedios.
Attachments
FlSky2A BIND in R233B5-1 .mp4
(2.78 MiB) Downloaded 98 times
FlSky2A BIND in R233B5-2.mp4
(3.65 MiB) Downloaded 111 times
User avatar
MikeB
9x Developer
Posts: 18030
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: MasterRadio TX16S

Post by MikeB »

I added something to make the binding operation timeout (after about a minute!). It looks like this may have upset detecting the MPM reporting bind has completed when it occurs. It may, however, detect the bind completing after 56 seconds.
Please could you try binding, but wait at least a minute after the LED on the Rx goes solid and see if the bind completes then.
A second test is to cancel the bind operation on the Tx after the LED on the Rx goes solid.
If either (or both) of these work then I'll be able to see what change I need to do.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

skyblue
Posts: 45
Joined: Wed Mar 09, 2016 3:28 pm
Country: -

Re: MasterRadio TX16S

Post by skyblue »

Here are the two test videos you want.
Attachments
test2 of R224p12 .mp4
(13.77 MiB) Downloaded 122 times
test1 of R224p12 .mp4
(9.27 MiB) Downloaded 110 times
User avatar
MikeB
9x Developer
Posts: 18030
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: MasterRadio TX16S

Post by MikeB »

I've posted a P13r224 for the TX16S.This has the bind timing changed so may work as before.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
skyblue
Posts: 45
Joined: Wed Mar 09, 2016 3:28 pm
Country: -

Re: MasterRadio TX16S

Post by skyblue »

Some parts of the P13R224 firmware still need to be modified.It needs about 5 seconds to detect the bind completing.
Attachments
Failsafe of R224P13.jpg
(1.74 MiB) Not downloaded yet
Failsafe of R223B5.jpg
(1.2 MiB) Not downloaded yet
IMG_1645 (online-video-cutter.com).mp4
(9.11 MiB) Downloaded 123 times
User avatar
MikeB
9x Developer
Posts: 18030
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: MasterRadio TX16S

Post by MikeB »

In the video, I see the time time taken to complete the binding. What is the rest of the video showing? I don't have any AFHDS2A hardware and therefore don't understand what all the beeps mean!

I've got the fix for the failsafe menu display bug.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
phil
Posts: 119
Joined: Thu Jan 14, 2016 7:03 am
Country: Germany
Location: München
Contact:

Re: MasterRadio TX16S

Post by phil »

I don't understand the whole discussion. I also have several flysky 2a, binding is quick and easy
skyblue
Posts: 45
Joined: Wed Mar 09, 2016 3:28 pm
Country: -

Re: MasterRadio TX16S

Post by skyblue »

In firmware R223B5 or R223B6, AFHDS2A binding is done immediately. But in firmware R224P13 it takes some time.Field flight operation this morning, , AFHDS2A binding is no problem.Forget the buzzer, that's just my failsafe seeker.
phil
Posts: 119
Joined: Thu Jan 14, 2016 7:03 am
Country: Germany
Location: München
Contact:

Re: MasterRadio TX16S

Post by phil »

hallo Mike hast du schon ein update machen können?
Gruß Siegi
User avatar
MikeB
9x Developer
Posts: 18030
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: MasterRadio TX16S

Post by MikeB »

I'm not sure what I may have changed, I've been working mainly on the X20, finding out how to use the 900MHz part and TANDEM mode.
I can build using the latest sources. I may have added "themes" to the display options, do you see a "Theme" option in Radio Setup|Display?

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
skyblue
Posts: 45
Joined: Wed Mar 09, 2016 3:28 pm
Country: -

Re: MasterRadio TX16S

Post by skyblue »

Yes,I find it.But I don't know how to use this function.
Attachments
IMG_2076.JPG
(206.89 KiB) Not downloaded yet
User avatar
MikeB
9x Developer
Posts: 18030
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: MasterRadio TX16S

Post by MikeB »

You may select from 4 themes. Each theme has its own brightness setting, together with text and background colours.
If a theme has not been configured, it will be set using the current values. Just select a theme number (0-3), then change the above settings for it.

MIke
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “erskyTx (was ersky9x)”