X9d back board component[SOLVED]

Hardware help and support for the FrSky Taranis
Post Reply
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

X9d back board component[SOLVED]

Post by OctavioS »

Usb connection is not working with my x9d turned off. It is recognized on pc, as I see stm32bootloader on device manager, but I cannot flash, since an error occurs.
Later I realize that download/file.php?mode=view&id=20935 is shorting.
What component is it and is it the problem?
thx
Attachments
IMG_20230305_094012__01.jpg
IMG_20230305_094012__01.jpg (100.17 KiB) Viewed 7517 times
Last edited by OctavioS on Mon Mar 06, 2023 11:40 am, edited 1 time in total.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.

User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X9d back board component

Post by Kilrah »

That's a fuse, it's supposed to be short...
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: X9d back board component

Post by OctavioS »

Kilrah wrote: Sun Mar 05, 2023 10:34 am That's a fuse, it's supposed to be short...
It figures...
Thx for your reply. Do you know what might be wrong for not being able to flash in dfu mode?
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: X9d back board component

Post by Kilrah »

As long as the PC detects it the hardware should be fine and it's probably PC/driver problems.
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: X9d back board component

Post by OctavioS »

I will try again, but i never had a problem with updating a tx in dfu mode, in fact, just before this one i updated another taranis and all went ok, but i will give it another try.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.

User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: X9d back board component

Post by OctavioS »

When i try to flash through eepskye, a message appears "Tx disk not mounted" and simply wont flash.
At this time the radio wont power on anymore. Its completely dead.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: X9d back board component [SOLVED]

Post by OctavioS »

So it was a cable problem. All working.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.

Post Reply

Return to “FrSky Taranis radio”