Adding momentary switch to Taranis X9D

Cant get your radio to work? General Hardware issues?
Post Reply
pmullen503
Posts: 275
Joined: Sun May 06, 2012 8:37 pm
Country: -
Location: Fond du Lac, WI

Adding momentary switch to Taranis X9D

Post by pmullen503 »

I really like the momentary buttons on the back of my X20S. I find them so useful that I would like to retrofit something similar to my X9D or X9D+

Are there any unused pins on the X9D or must I use one of the existing switches or pots?

TIA

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Adding momentary switch to Taranis X9D

Post by MikeB »

Both my prototype X9D and prototype X9D+ have extra connections made to the JTAG pads JTCK and JTMS, and erskyTx includes options in the hardware menu to use these as extra switches called PB1 and PB2.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Adding momentary switch to Taranis X9D

Post by bob195558 »

Most of the switch upgrades were with the Turnigy 9x and 9xr radios.
I did a search and this turned up: viewtopic.php?f=7&t=5468&p=102745&hilit ... B2#p102745
May be a help for you.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).

Post Reply

Return to “Hardware”