ERSKYTx (was ersky9x) Questions

erskyTx runs on many radios and upgrade boards
ersky9x was a port of er9x for use on the sky9x board.
AlessB
Posts: 24
Joined: Wed Mar 01, 2017 9:09 am
Country: Ukraine

Re: ERSKYTx (was ersky9x) Questions

Post by AlessB » Mon Dec 28, 2020 6:25 pm

Hi Mike. I tried your recommendation. But multiply max 60 unit and divisor 232. Everything is correct in the menu 1852 and 1000, but CS1 shows multiplier 60 and divisor 232, and calculation output this


User avatar
MikeB
9x Developer
Posts: 17333
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKYTx (was ersky9x) Questions

Post by MikeB » Mon Dec 28, 2020 8:44 pm

Did you set the values in eepskye? It looks like I haven't handled larger values being edited in eepskye. Please try setting the values on the radio.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

AlessB
Posts: 24
Joined: Wed Mar 01, 2017 9:09 am
Country: Ukraine

Re: ERSKYTx (was ersky9x) Questions

Post by AlessB » Tue Dec 29, 2020 6:08 am

Hi Mike. Thanks for your answer. I tried in eepsky and radio (Ar9x). Both results are the same. Firmware last test. I can take screenshots if needed.

User avatar
MikeB
9x Developer
Posts: 17333
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKYTx (was ersky9x) Questions

Post by MikeB » Tue Dec 29, 2020 7:33 pm

According to my testing, the values displayed on the radio while editing a single Scaler are correct, and are used correctly in the calculation.
The values displayed on the screen showing 7 Scalers are showing incorrectly, but the real values are still used in the calculation.
eepskye is wrong and will not edit the values correctly. However, if you don't edit a value, eepskye should keep the value set on the radio.
I have fixes for eepskye and the radio screen displaying 7 Scalers. I'll post these in the next day or 2.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

AlessB
Posts: 24
Joined: Wed Mar 01, 2017 9:09 am
Country: Ukraine

Re: ERSKYTx (was ersky9x) Questions

Post by AlessB » Thu Dec 31, 2020 7:04 pm

Mike thank for you very job! Happy New Year!


User avatar
MikeB
9x Developer
Posts: 17333
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: ERSKYTx (was ersky9x) Questions

Post by MikeB » Sun Jan 03, 2021 12:24 pm

I've posted an update with this fix in. eepskye is included (.exe only), this is the version that is compiled using QT5.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

AlessB
Posts: 24
Joined: Wed Mar 01, 2017 9:09 am
Country: Ukraine

Re: ERSKYTx (was ersky9x) Questions

Post by AlessB » Sat Jan 09, 2021 11:46 am

Mike thanks. Now everything is showing correctly.


Post Reply

Return to “erskyTx (was ersky9x)”