9x been modded
9x been modded
Hi any one any idea what's been done to this transmitter
- ShowMaster
- Posts: 4327
- Joined: Thu Dec 29, 2011 3:44 am
- Country: -
- Location: Los Angeles, CA USA
Re: 9x been modded
Wow what a mess. The white board is a smartipsrts board designed to flash the much processor with upgraded firmware like er9x. It also adds a backlight.
Not sure what the sparkfun board does but maybe it’s fixing a usb connection the smartiparts boars comes with?
This sp board and er9x firmware adds telemetry display the the screen from a Frsky D receiver.
http://smartieparts.com/shop/index.php? ... cts_id=331
The diode and other parts higher on the switch boars was to modify the beeper circuit.
More mods info
https://www.rcgroups.com/forums/showthr ... R9X-OpenTX
https://openrcforums.com/forum/viewforum.php?f=71
The second picture is showing a internal installed Frsky dht solder in module. This 2.4g module supports telemetry from the D receiver to the SP board.
No idea why a external DJT Frsky module wasn’t used unless it left the back case port open for other module options.
Sent from my iPhone using Tapatalk Pro
Not sure what the sparkfun board does but maybe it’s fixing a usb connection the smartiparts boars comes with?
This sp board and er9x firmware adds telemetry display the the screen from a Frsky D receiver.
http://smartieparts.com/shop/index.php? ... cts_id=331
The diode and other parts higher on the switch boars was to modify the beeper circuit.
More mods info
https://www.rcgroups.com/forums/showthr ... R9X-OpenTX
https://openrcforums.com/forum/viewforum.php?f=71
The second picture is showing a internal installed Frsky dht solder in module. This 2.4g module supports telemetry from the D receiver to the SP board.
No idea why a external DJT Frsky module wasn’t used unless it left the back case port open for other module options.
Sent from my iPhone using Tapatalk Pro
Re: 9x been modded
I can't see an antenna connected to the module??? ![Surprised :o](./images/smilies/icon_e_surprised.gif)
João
Sent from my BLN-L21 using Tapatalk
![Surprised :o](./images/smilies/icon_e_surprised.gif)
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: 9x been modded
WOW ! how things have changed in just a few years.
I still have one 9x with Steven's 9x SP 9x Programmer (Rev 2.3)
board and with the 9x TelemetrEZ (Rev 1.0) board.
I have always run the telemetry wires through the back of the radio case
to the FrSky transmitter too.
I have several old un-used SP 9x Programmer boards from
upgrading 9x radios to the 9XTreme boards, which are sold out.
Wish 9XTreme boards were still available.![Crying or Very Sad :cry:](./images/smilies/icon_cry.gif)
I still have one 9x with Steven's 9x SP 9x Programmer (Rev 2.3)
board and with the 9x TelemetrEZ (Rev 1.0) board.
I have always run the telemetry wires through the back of the radio case
to the FrSky transmitter too.
I have several old un-used SP 9x Programmer boards from
upgrading 9x radios to the 9XTreme boards, which are sold out.
Wish 9XTreme boards were still available.
![Crying or Very Sad :cry:](./images/smilies/icon_cry.gif)
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: 9x been modded
You haven't noticed that?
![Smile :)](./images/smilies/icon_e_smile.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: 9x been modded
![Very Happy :D](./images/smilies/icon_e_biggrin.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Mr. Green :mrgreen:](./images/smilies/icon_mrgreen.gif)
![Wink ;)](./images/smilies/icon_e_wink.gif)
Last edited by bob195558 on Sun Jan 20, 2019 7:31 pm, edited 2 times in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: 9x been modded
Still snowing.
Last edited by bob195558 on Sun Jan 20, 2019 10:50 pm, edited 1 time in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
- MikeB
- 9x Developer
- Posts: 18051
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: 9x been modded
I think the red, Sparkfun board is a level converter for the telemetry connection to/from the DHT module.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: 9x been modded
Didn't the SP board have the converter already on it?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: 9x been modded
If I remember correctly, you could do your own upgrade to have Telemetry
or purchase from Steven, his plug and play 9x TelemetrEZ board,
which was much easier to install.
The SP board did the USB Program flashing and the Back Light for the display.
More about the (Rev 2.3: White board. Now includes header and plug/wires for LED connection
and Header for possible future use with TelemetrEZ added.)
Smartieparts.com: (http://smartieparts.com/shop/index.php? ... cts_id=331).
Discontinued SP Products: (https://smartieparts.com/shop/index.php ... ex&cPath=9).
Take a trip down memory lane.
(http://smartieparts.com/shop/)
Some more old 9Xtreme board info here: (https://openrcforums.com/forum/viewtopi ... =95&t=7182).
or purchase from Steven, his plug and play 9x TelemetrEZ board,
which was much easier to install.
The SP board did the USB Program flashing and the Back Light for the display.
More about the (Rev 2.3: White board. Now includes header and plug/wires for LED connection
and Header for possible future use with TelemetrEZ added.)
Smartieparts.com: (http://smartieparts.com/shop/index.php? ... cts_id=331).
Discontinued SP Products: (https://smartieparts.com/shop/index.php ... ex&cPath=9).
Take a trip down memory lane.
(http://smartieparts.com/shop/)
Some more old 9Xtreme board info here: (https://openrcforums.com/forum/viewtopi ... =95&t=7182).
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: 9x been modded
Hello Bill -bob195558 wrote: ↑Sun Jan 20, 2019 12:54 pm WOW ! how things have changed in just a few years.
I still have one 9x with Steven's 9x SP 9x Programmer (Rev 2.3)
board and with the 9x TelemetrEZ (Rev 1.0) board.
I have always run the telemetry wires through the back of the radio case
to the FrSky transmitter too.
I have several old un-used SP 9x Programmer boards from
upgrading 9x radios to the 9XTreme boards, which are sold out.
Wish 9XTreme boards were still available.![]()
Thanks for your post...i recently purchased one of these FlySky FS-TH9x. Im new to RC building my first drone for aerial photo. Anyways, i was wondering if you wanted to sell one of those 9Xtreme boards or program cables.?
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: 9x been modded
See here about 9xtreme boards that are not assembled: https://openrcforums.com/forum/viewtopi ... 60#p147801
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
-
- Posts: 68
- Joined: Mon Aug 17, 2020 4:25 pm
- Country: United States
Re: 9x been modded
topdiggy2 these are the only ones still avalible. If you need ready made, this is where it is at.
https://smartieparts.com/shop/index.php ... e5nhv06665
Re: 9x been modded
This is an early Smartie Parts mod to allow reprogramming with out to much soldering. The internal FrSky Tx module has been added or a standard module has been modified and at a guess a further mod has been made to add sound. there was some problems with telemetering which may have been corrected with the Spark-fun board, it is not possible to tell from here , perhaps someone else will know. You should put this in Turnigy 9x instead of th9x it is an obscure place and may not be seen.
I did not see all the other answers when I posted this.
![Smile :)](./images/smilies/icon_e_smile.gif)