csv.file
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: csv.file
I tend to use Excel as I have it, but the .csv file will also open in OpenOffice.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: csv.file
I have Open Office but I don't know how to use it to display grahical .csv files; maybe there is a lighter software, just a simple module dedicated to such a simple work ?
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: csv.file
I don't know of a simpler module for this.
In OpenOffice, I just open the .csv file (in the dialog just make sure the separator is set to "comma").
Then select the columns to display on a graph. e.g. If I want to graph the current, which is in the column headed with "K", I click on the K, and usually the elapsed time that is in column "B", so click on the "B" while holding the CTRL key down. You should now have two columns highlighted.
The just click on the "CHART" button. You get a graph displayed, together with a "Chart Wizard". In this I select "Line" as the "Chart Type", and the "Lines Only", then click the Finish button.
Mike
In OpenOffice, I just open the .csv file (in the dialog just make sure the separator is set to "comma").
Then select the columns to display on a graph. e.g. If I want to graph the current, which is in the column headed with "K", I click on the K, and usually the elapsed time that is in column "B", so click on the "B" while holding the CTRL key down. You should now have two columns highlighted.
The just click on the "CHART" button. You get a graph displayed, together with a "Chart Wizard". In this I select "Line" as the "Chart Type", and the "Lines Only", then click the Finish button.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: csv.file
Thanks Mike, I will try that...
I thought about the Companion module but, for some reason, it doesnot accept the .csv file recorded with the PRO; is there a way to simply mod the file to be compatible ?
MP
I thought about the Companion module but, for some reason, it doesnot accept the .csv file recorded with the PRO; is there a way to simply mod the file to be compatible ?
MP
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: csv.file
Not sure if it is simple but first the headings of the first two columns need to be:
"Date,Time,"
then the data in the first two columns needs to be like:
2020-01-25,00:00:00.000
(note the time column doesn't have the ' character).
The date is year-month-day and the time must have all digits present.
With those changes, I succeeded in loading an erskyTx log file into openTx Companion V2.3.9.
I may be able to change the logging in erskyTx to produce this format, and/or I may be able to add the logfile display into eepskye.
Mike
"Date,Time,"
then the data in the first two columns needs to be like:
2020-01-25,00:00:00.000
(note the time column doesn't have the ' character).
The date is year-month-day and the time must have all digits present.
With those changes, I succeeded in loading an erskyTx log file into openTx Companion V2.3.9.
I may be able to change the logging in erskyTx to produce this format, and/or I may be able to add the logfile display into eepskye.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: csv.file
That would be cool Mike, thank you.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: csv.file
I've just posted a test version of erskyTx, for the 9XR-PRO, that formats the logfile so it displays in the openTx Companion logfile viewer.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: csv.file
Very good, thanks
MP
MP
Re: csv.file
Hi Mike
Ihave a TH9X/AR9x , can I flash the same FW as the PRO one ?
MP
Ihave a TH9X/AR9x , can I flash the same FW as the PRO one ?
MP
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: csv.file
No, you need the test version I've just posted! (ersky9x_romLogGraph.zip)
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: csv.file
Well, I have an issue, the flash stop before the end; I know the issue come from the bootloader but I don't know how to update it...
MP
MP
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: csv.file
What version of the bootloader do you have?
The method of updating the bootloader is to put the erskyTx .bin file on the SD card, in the "FIRMWARE" directory, start the radio in maintenance mode (horizontal trims held apart at power on), then select "Update Bootloader", select the file and confirm.
Clearly this will only work if the radio will run.
Do you have a copy of the firmware that was running on this radio, if so, flash that, then use the above method to update the bootloader, then flash the new firmware. Versions of erskyTx (ersky9x) up to and including R220 fit in the first 256K so should flash correctly, ersky9xs_rom.bin from R221 also fits in the first 256K.
Mike
The method of updating the bootloader is to put the erskyTx .bin file on the SD card, in the "FIRMWARE" directory, start the radio in maintenance mode (horizontal trims held apart at power on), then select "Update Bootloader", select the file and confirm.
Clearly this will only work if the radio will run.
Do you have a copy of the firmware that was running on this radio, if so, flash that, then use the above method to update the bootloader, then flash the new firmware. Versions of erskyTx (ersky9x) up to and including R220 fit in the first 256K so should flash correctly, ersky9xs_rom.bin from R221 also fits in the first 256K.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: csv.file
Many thanks, that is OK
MP
MP
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: csv.file
I've just posted a test version of eepskye that includes a log file viewer (I just copied the source files from companion!). This supports both old and new format log files. I have, however, needed to migrate eepskye to QT5 to get this to compile. I have also therefore also included eepe built from QT5.
Install by extracting all files from the .zip file, keeping the directory structure, to a suitable directory.
Mike
Install by extracting all files from the .zip file, keeping the directory structure, to a suitable directory.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: csv.file
Thanks Mike. that is wonderful.. Does that mean Eepskye doesn't need eepe installed to run anymore?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: csv.file
Sort of! You need the supporting QT dll files, it was just easiest to install eepe to get these installed. The .zip file actually includes eepe compiled on QT5 as well anyway.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!