I just tried the AFHDS-2A iA6B Rx with my Horus/4in1 module/OTX 2.2.1.
I get RSSI and CVT01 but not the CAT01 sensor, what I can do ?
Thanks
MP
AFHDS-2A telemetry
Re: AFHDS-2A telemetry
Update everything, believe it was added at some point.
Re: AFHDS-2A telemetry
I have an issue to flash my X10: I have the usb logo on the screen but Companion tell me "not connected, driver not installed
very strange since I can read the models ...
very strange since I can read the models ...
Re: AFHDS-2A telemetry
To flash firmware you must be in bootloader mode or off, not on.
Re: AFHDS-2A telemetry
I guess you tell "Tx off" ?
When I do that I see the transfer is instantly on the PC screen....but the FW remain the same (2.2.1)
I get the message
Filter on vendor = 0x0483 product = 0xdf11
More than one DFU capable USB device found, you might try `--list' and then disconnect all but one device
When I do that I see the transfer is instantly on the PC screen....but the FW remain the same (2.2.1)
I get the message
Filter on vendor = 0x0483 product = 0xdf11
More than one DFU capable USB device found, you might try `--list' and then disconnect all but one device
Re: AFHDS-2A telemetry
OK, I changed the PC and now the Horus is flashed with the 2.3.10 FW but now it ask to update the multi-module, howto ? with Companion ? it is the 328 one.
Re: AFHDS-2A telemetry
Separate project, separate tools. https://www.multi-module.org/using-the- ... re-updates
Re: AFHDS-2A telemetry
OK updated both OTX and module (STM32)....but no CAT01 sensor...
Re: AFHDS-2A telemetry
Support was apparently added about a year ago.
https://github.com/pascallanger/DIY-Mul ... issues/250
https://github.com/pascallanger/DIY-Mul ... issues/250
Re: AFHDS-2A telemetry
Oupss, sorry Kilrah, I was wrong , I discovered the Alt sensor, and the atmospheric pressure!
Thanks for your help
MP
Thanks for your help
MP