How to transfer model settings from one radio to other, without Companion?
radio: Jumper T12 Pro
Now usb port not recognized and not worked.
I.e. using uSD card?
I tried to make a backups of models on QX7, copied it to the SD for T12, but when I try to restore on T12, it fails due to incompatibility.
Version of opentx 2.3.9 on both radios.
Perhaps there is a Lua script for importing from an otx file on SD card?
How to transfer model settings between 2 radio without companion?
-
- Posts: 51
- Joined: Tue Nov 14, 2017 11:53 am
- Country: Russian Federation
How to transfer model settings between 2 radio without companion?
good food & warm summer
Re: How to transfer model settings between 2 radio without companion?
You can't, companion is required.
Re: How to transfer model settings between 2 radio without companion?
I can, but I use another firmware..
With ErskyTX I can transfer models and other files between transmitters via bluetooth Your radios must have Bluetooth of course Here is a video I made..
João
https://youtu.be/xG194ryw38Q
With ErskyTX I can transfer models and other files between transmitters via bluetooth Your radios must have Bluetooth of course Here is a video I made..
João
https://youtu.be/xG194ryw38Q
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 277
- Joined: Sun May 06, 2012 8:37 pm
- Country: -
- Location: Fond du Lac, WI
Re: How to transfer model settings between 2 radio without companion?
If you can get the files into a computer with a card reader, you should be able to load your QX7 file and copy them over to your T12 models in Companion and then save them back to the card.
-
- Posts: 51
- Joined: Tue Nov 14, 2017 11:53 am
- Country: Russian Federation
Re: How to transfer model settings between 2 radio without companion?
Guys, interesting ideas. I'll have to try and check.
Comes for another project. Although I fixed the USB on T12pro.
João,
what is filer.bas & filet.bas? Where i can see it?
pmullen503,
You talk about .bin files?
Comes for another project. Although I fixed the USB on T12pro.
João,
what is filer.bas & filet.bas? Where i can see it?
pmullen503,
You talk about .bin files?
good food & warm summer
Re: How to transfer model settings between 2 radio without companion?
They are script files for ErskyTx. Actually I think that since a while there is only one that does both transmitting and receiving.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW