Er9x installation tutorial.
Er9x installation tutorial.
I cannot access the Er9x installation tutorial links on the site "https://github.com/MikeBland/mbtx". I need to update my radio and I can't get any information. Can someone help me?
Re: Er9x installation tutorial.
Lots of now overaged/dead links on the site you mentioned. But what exactly is your problem?
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Er9x installation tutorial.
I've just realised most of the files are here: https://github.com/MikeBland/er9x/tree/master/doc.
I'll try to get the links sorted.
Mike
I'll try to get the links sorted.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Er9x installation tutorial.
I found a 2010 tutorial, it is updated, are the same procedures today?MikeB wrote: ↑Tue Jun 09, 2020 8:52 am I've just realised most of the files are here: https://github.com/MikeBland/er9x/tree/master/doc.
I'll try to get the links sorted.
Mike
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Er9x installation tutorial.
Yes, same procedures still.
What radio do you have? If it is a 9X, does it have a programmer connector? Does it have a SmartieParts board?
Do you have eepe installed on your computer?
Mike
What radio do you have? If it is a 9X, does it have a programmer connector? Does it have a SmartieParts board?
Do you have eepe installed on your computer?
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Er9x installation tutorial.
Many links on the mbtx on Github now changed to point to the files on er9x on Github.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Er9x installation tutorial.
My radio is the 9x. I made the adaptation of the door in 2014 and installed a version of Er9x. Now I want to update. I already downloaded the files. I just translated the tutorial into Portuguese. This is my biggest difficulty, sometimes the Google translation is a little pointless. I thank you for your attention, if it gets difficult I go back to the forum to ask for help. A hug.
Re: Er9x installation tutorial.
just updated the Radio, it is already with version 820, now I am going to battle, translate the manual to Portuguese.Nmoller wrote: ↑Wed Jun 10, 2020 2:26 amMy radio is the 9x. I made the adaptation of the door in 2014 and installed a version of Er9x. Now I want to update. I already downloaded the files. I just translated the tutorial into Portuguese. This is my biggest difficulty, sometimes the Google translation is a little pointless. I thank you for your attention, if it gets difficult I go back to the forum to ask for help. A hug.
-
- Posts: 5
- Joined: Wed Jun 17, 2020 2:43 pm
- Country: -
Re: Er9x installation tutorial.
i have new board ED40502-H16D for Turnigy9x which i managed to fry while soldering. I installed also SP Basic 9x Programmer. When open eeye, i got TX not mounted. WinUSBasp is detect and driver is installed via Zadiq. When i switch ON, i got blank display and backlight ON. No beep what so ever. Please assist me