FRSKY R9M compatibility?

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
User avatar
McWeird
Posts: 2
Joined: Tue Oct 22, 2019 2:44 pm
Country: Spain

Re: FRSKY R9M compatibility?

Post by McWeird » Tue Oct 22, 2019 9:38 pm

Bonde wrote:
Sun Mar 17, 2019 1:24 pm
This is a photo from
The insideimage.jpg
Gonna be doing the telemetry mods on mine as soon as I get my r9m module delivered. I've been doing some research online, and most of the results pointed to old posts on this forum wondering how reliable the ed040502 h16d 1102 chip would be running this, and people talking about swapping it for genuine atmel chips, but for the meantime I want to see if it's not needed.

So far I've flashed er9x with no issues and everything seems to work fine if flashing with the m128 option on eePe with the stock 2,4ghz module. Some messages while flashing from eePE about the clock speed being off but that seemed to be all. Will update once I do the mods so people can search for the results.


Mushahid
Posts: 1
Joined: Sat Nov 02, 2019 9:56 pm
Country: -

Re: FRSKY R9M compatibility?

Post by Mushahid » Sat Nov 02, 2019 10:01 pm

Hi there !..

Actually I ordered r9 module , and I have turnigy 9x transmitter... and now I can't bind r9 miduke with its mini receiver....anyone please tell me what to do... I am too stressed because of it...
I shall be grateful to you....Thank you.

User avatar
Turbo99
Posts: 11
Joined: Tue Nov 05, 2019 2:45 pm
Country: -

Re: FRSKY R9M compatibility?

Post by Turbo99 » Sat Nov 09, 2019 10:09 am

That's an interesting point, I never thought about. Are you sure the R9m fits to the Turnigy? Do you know whether it fits to the Turnigy 10-ia too?

User avatar
MikeB
9x Developer
Posts: 16880
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FRSKY R9M compatibility?

Post by MikeB » Sat Nov 09, 2019 11:15 am

What revision of firmware (er9x) are you running on your 9X?
You need to be using firmware from "er9xProv822g.zip", or later, to have R9M support.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

hyperion
Posts: 2
Joined: Wed Jan 15, 2020 3:56 am
Country: -

Re: FRSKY R9M compatibility?

Post by hyperion » Wed Jan 15, 2020 4:00 am

Hello MikeB. Thank you very much for your work.
I have 9xr with atmega128. And order R9M.
What FW i need to use? What is latest stable?
er9xProv822m.zip + eepeV2.zip
FLEX R9M FW supported?
Changing frequency and output power also supported?
Thanks!


User avatar
MikeB
9x Developer
Posts: 16880
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: FRSKY R9M compatibility?

Post by MikeB » Wed Jan 15, 2020 3:20 pm

er9xProv822m.zip should work fine, and includes support for FLEX and setting frequency and power.
Use eepe.zip with this.
Only use eepeV2.zip if you are using er9xV2, the EEPROM structure is very different for V2.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
McWeird
Posts: 2
Joined: Tue Oct 22, 2019 2:44 pm
Country: Spain

Re: FRSKY R9M compatibility?

Post by McWeird » Wed Jan 29, 2020 6:59 pm

McWeird wrote:
Tue Oct 22, 2019 9:38 pm

Gonna be doing the telemetry mods on mine as soon as I get my r9m module delivered. I've been doing some research online, and most of the results pointed to old posts on this forum wondering how reliable the ed040502 h16d 1102 chip would be running this, and people talking about swapping it for genuine atmel chips, but for the meantime I want to see if it's not needed.

So far I've flashed er9x with no issues and everything seems to work fine if flashing with the m128 option on eePe with the stock 2,4ghz module. Some messages while flashing from eePE about the clock speed being off but that seemed to be all. Will update once I do the mods so people can search for the results.
After a really busy time I'm happy to report that the ed040502 h16d 1102 chip works just fine with the firmware from "er9xProv822g.zip" and the r9 module. Binding and telemetry work, but I haven't had time to mess around withe the flex stuff yet, thanks to the folks behind this project and MikeB for the messages and guidance in this thread!

hyperion
Posts: 2
Joined: Wed Jan 15, 2020 3:56 am
Country: -

Re: FRSKY R9M compatibility?

Post by hyperion » Tue Mar 24, 2020 10:55 am

confirm, er9xProv822m with latest ACCST firmware work with R9M 2019. Succesfully binding, range test. Not checked power settings yet


Post Reply

Return to “er9x”