Opentx 2.2.4
Opentx 2.2.4
Just a matter of curiosity has anyone had any problems with the above,on on occasion my crowbrakes refused to work and I've also notice that I'm unable to create a powered model in the templates on the transmitter. To top it all I have all its cost me a model, So I'm now back with 2.2.3. Would be very interested if anyone has had a similar outcome
Re: Opentx 2.2.4
We have not had any reports of control issues on 2.2.4 after 20'000+ downloads.
There might be something wrong in your configuration. Saying what radio you're using and posting your model file could probably allow someone to help you find out what.
There might be something wrong in your configuration. Saying what radio you're using and posting your model file could probably allow someone to help you find out what.
Re: Opentx 2.2.4
The transmitter is Horus10s, I will send the model file later
Re: Opentx 2.2.4
Please find the file attached, would be interesting to know what the problems is
- Attachments
-
- Phoenix2000.otx
- (920 Bytes) Downloaded 306 times
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: Opentx 2.2.4
If it does not work "on on occasion my crowbrakes refused to work".
I'ld be looking for connector problems.
I'ld be looking for connector problems.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: Opentx 2.2.4
I looked on the monitor page and I could see that the travel was full in one direction, if I attempt to use the slider to correct it nothing happened
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: Opentx 2.2.4
Since I see no Sliders used in the .otx (FM, INPUTS, MIXES) That does not seem surprising to me.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
Re: Opentx 2.2.4
My apologies for uploading the wrong profile, unfortunately is looks like I've deleted it in anger. If the problem happens again I will ask for help, thanks to you all
Re: Opentx 2.2.4
A little piece of advice, if something "sometimes doesn't work" then stop and fix it, don't continue flying.
Re: Opentx 2.2.4
very good advice. better to have a spoiled flying day, than a spoiled flying day and a destroyed model.
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Opentx 2.2.4
Hi, I have updated opentx to 2.2.4 and the firmware on my Horus X10s and the first issue was that in a model ( tricopter)all channel settings were not centered specially on rudder and throttle stick axis . Then I tried to recalibrate all channels ( I never had the need to recalibrate after every update before ), but I didn’t found the same point calibration as before . Plus in another model (delta wing ) I had on radio profile settings the TEAR channel order changed in TAER .. so don’t know ... it wasn’t a chase for sure .
Inviato dal mio iPad utilizzando Tapatalk
Inviato dal mio iPad utilizzando Tapatalk
__________________________Equipment_______________________________
TX: X9DP(B01 ver),Fw:OTx v2.2.0 EEPR 218,FwRadio:(LBT151223)
RXs: FrSky X8R(LBT151118), FrSky X4RSB(LBT170322), FrSky D4r2(LBT151118)
Mods:extAnt,6rsw,M9gimb
_____________________________
TX: X9DP(B01 ver),Fw:OTx v2.2.0 EEPR 218,FwRadio:(LBT151223)
RXs: FrSky X8R(LBT151118), FrSky X4RSB(LBT170322), FrSky D4r2(LBT151118)
Mods:extAnt,6rsw,M9gimb
_____________________________