OpenTX X10S to Tarranis QX7
OpenTX X10S to Tarranis QX7
Would it be possible to copy a file from an X10S in OpenTX Companion and upload it to a Tarranis QX7
Re: OpenTX X10S to Tarranis QX7
Could you specify the type of file, you want to copy?
br
br
Re: OpenTX X10S to Tarranis QX7
The file that you save when you back up your models.
Re: OpenTX X10S to Tarranis QX7
That will not work as far as I know. To copy models from one transmitter to the next, you need to use Companion.
Companion will convert the data for the format used in the X10s to the format for the X7
Companion will convert the data for the format used in the X10s to the format for the X7
Re: OpenTX X10S to Tarranis QX7
tonnie78. That is what I mentioned in my original post. Using Companion to copy models from the X10S to the X7.
Re: OpenTX X10S to Tarranis QX7
Sorry, I didn't fully understand the opening post. If you set up both transmitters in Companion, then I think you can drag and drop a model from one radio to the next in Companion
Re: OpenTX X10S to Tarranis QX7
Perfect. That is what I'm hoping.
Re: OpenTX X10S to Tarranis QX7
Set companion to an X7 profile, read your X7, read/open a file from your X10, drag models to X7 window, check/rework them because of the different controls, write to X7
-
- Posts: 121
- Joined: Wed Dec 02, 2015 9:25 pm
- Country: United Kingdom
Re: OpenTX X10S to Tarranis QX7
I would also add:
Do check that the function of each facet of your model setup works as expected on your model before flying. Occasionally not everything is converted exactly.
Do check that the function of each facet of your model setup works as expected on your model before flying. Occasionally not everything is converted exactly.