Hi guys,
I want to use two x10S transmitters connected with bluetooth. When I select master/bluetooth on number 1 I get an init box and nothing happens, When I select slave/bleutooth on the other then I see Ch1-Ch8 and nothing happens What do I have to do to connect the 2 transmitters?
I have looked at all kinds of manuals but I can't find anything. Not even a youtube video which shows this connection.
regards,
Jarco
wireless trainer
Re: wireless trainer
I just tried last weekend.
Used two Horus X10S transmitters.
Set the master to Bluetooth trainer master and then switch off and restart.
Set the second to Bluetooth student. Also switch of end switch back on.
Then in the model menu also check trainer settings
Used two Horus X10S transmitters.
Set the master to Bluetooth trainer master and then switch off and restart.
Set the second to Bluetooth student. Also switch of end switch back on.
Then in the model menu also check trainer settings
Re: wireless trainer
Tonnie78
Thanks for your directions. I also stumbled into setting the bluetooth usage on one of the system pages. After setting it to trainer everything work like a charm, It seems a little slow did you notice that also?
Thanks for your directions. I also stumbled into setting the bluetooth usage on one of the system pages. After setting it to trainer everything work like a charm, It seems a little slow did you notice that also?
Re: wireless trainer
I have only tried binding, not used it yet for flying, so no, i haven't noticed any lag
Re: wireless trainer
Current BT trainer is known to be too slow for most uses.
Re: wireless trainer
So you suggest using a compact SBUS receiver connected to the Master transmitter and bound to the Student Transmitter?
Re: wireless trainer
That's much better indeed.