9XR Pro trim buttons repair
9XR Pro trim buttons repair
I opened up my 9XR Pro and somehow the 2 vertical trim buttons popped out. I cannot figure out how to reinstall them. Can anyone send a picture, video or somehow help me out with it?
Re: 9XR Pro trim buttons repair
Set them on the small pins and carefully replace the faceplate which will hold them in place.
Look at the horizontal trim buttons, they fit the same.
Look at the horizontal trim buttons, they fit the same.
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
Re: 9XR Pro trim buttons repair
Those parts are still available and cheap.
https://hobbyking.com/en_us/trims-tab-t ... tore=en_us
https://hobbyking.com/en_us/trims-tab-t ... tore=en_us
Re: 9XR Pro trim buttons repair
Inclusive of shipping, it becomes quite costly just for the pins. Is there any alternative? Do you know the pin size so maybe I can get one from the local store?budavaril wrote: ↑Fri Dec 07, 2018 10:09 pm Those parts are still available and cheap.
https://hobbyking.com/en_us/trims-tab-t ... tore=en_us
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: 9XR Pro trim buttons repair
I have 10 sets of pins and trim buttons ..I'll be glad to ship you a few. I'm sure we can find a cheap way to ship .I can measure the pins and give you the size also
Allen
Allen
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: 9XR Pro trim buttons repair
They are 7.0mm long x .5mm in diameter
Allen
Allen
Re: 9XR Pro trim buttons repair
Hey Allen, I will be glad to purchase it from you but I am not really sure about what pin size will fit in the 9XR Pro.antlerhanger wrote: ↑Thu Apr 11, 2019 8:42 pm I have 10 sets of pins and trim buttons ..I'll be glad to ship you a few. I'm sure we can find a cheap way to ship .I can measure the pins and give you the size also
Allen
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: 9XR Pro trim buttons repair
I will give them to you .The size is 7.0mm long x .5mm in diameter
Allen
Allen
Re: 9XR Pro trim buttons repair
Hi Allen, I just measured the pins and they happen to be of 8.0mm long X 2.0mm in diameter.antlerhanger wrote: ↑Fri Apr 12, 2019 2:36 pm I will give them to you .The size is 7.0mm long x .5mm in diameter
Allen
Re: 9XR Pro trim buttons repair
Hi,
pins are diam 1.5mm and 8.0mm long, measured with a caliper.
You can replace with 1.5mm piano wire if you have some lying around.
Miguel
pins are diam 1.5mm and 8.0mm long, measured with a caliper.
You can replace with 1.5mm piano wire if you have some lying around.
Miguel
We demand rigidly defined areas of doubt and uncertainty. Douglas Adams.
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: 9XR Pro trim buttons repair
Here is the pics
They are for the pro
Last edited by antlerhanger on Sat Apr 13, 2019 6:03 pm, edited 1 time in total.
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: 9XR Pro trim buttons repair
More pics
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: 9XR Pro trim buttons repair
Let me know if you need them
Allen
Allen
Re: 9XR Pro trim buttons repair
Please check inbox