So I built a openxvario (works great) and wired a ACS712 current sensor to it . My question is do I just hook the +red into the ACS712 lugs from the 3s battery or do I use red and black..Seems to me only red because of ground loop ..Any help will be appreciated
THANKS
Allen
I'm using a x8r receiver with latest fw on 9xr pro
current sensor help...ACS712
Moderator: rainer
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: current sensor help...ACS712
Have a look here
https://www.helifreak.com/showthread.php?t=758263
He is using an ACS 758, but ACS 712 should be wired in the same way.
https://www.helifreak.com/showthread.php?t=758263
He is using an ACS 758, but ACS 712 should be wired in the same way.
Re: RE: current sensor help...ACS712
If.you.connect red and black to the sensor, you don't get a ground loop, you get a short citcuit and lots of smoke, and probably fire as wellantlerhanger wrote: My question is do I just hook the +red into the ACS712 lugs from the 3s battery or do I use red and black..Seems to me only red because of ground loop ..Any help will be appreciated
Just the positive passes through the current sensor.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: current sensor help...ACS712
Thanks so much for your help . I actually built it last night the right way . I was just confused by some of the pics out there but then I realized what I needed to do . So no smoke yet ( Yet is the key word ) . Thanks again for your help
Allen
jhsa I still need to build the internal power switch for the rf modules .. have all the parts just need to solder up..I'm sure I will be picking ur brain
Allen
jhsa I still need to build the internal power switch for the rf modules .. have all the parts just need to solder up..I'm sure I will be picking ur brain
Re: current sensor help...ACS712
No Prob.. Glad to help
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW