ERSKY9X on Taranis
Re: ERSKY9X on Taranis
I also have multi modules installed internally in my radios, I don't have a Taranis though. But the only advantage in my opinion is the screen size, as my 9x radios have all the goodies, including controlling power to both internal and external modules. I don't really miss a Taranis.
João
Sent from my BLN-L21 using Tapatalk
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: ERSKY9X on Taranis
jhsa , I am going to install modules inside my pro's . I will also need to install your power switch . I like the feel of the pro better .The screen size doesn't bother me as I'm looking up while I fly . The voice has made it so much better !
Allen
Allen
Re: ERSKY9X on Taranis
You will have to build.your own modules power switch. Can you solder and are you familiar with programming an Attiny85 chip?
Will post the link to the project page when I get to my PC.
João
Sent from my BLN-L21 using Tapatalk
Will post the link to the project page when I get to my PC.
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: ERSKY9X on Taranis
Yes on both...I found your thread on the switch ..I will probably be asking you questions tho
Re: ERSKY9X on Taranis
I like your idea of using the brain of a Taranis as a base to build your own radio. I did something similar with the board of a 9XR-Pro.antlerhanger wrote: ↑Fri Feb 22, 2019 11:46 pm I really bought the Taranis to experiment on ..I changed the case and upgraded speaker and put M9 Gimbals in it..I was just wondering if I could unsolder the XJT module and install a internal module..No big deal as the external module will do what I need . I Use my pro as my main radio . ERSKY9X is a fantastic FW
Will you share some photos, please ?
Miguel
We demand rigidly defined areas of doubt and uncertainty. Douglas Adams.
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: ERSKY9X on Taranis
jhsa when you get time can you tell me where the info of your module switch is ,Please ..I've looked at it before but can't find it now
Thanks again
Allen
Thanks again
Allen
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: ERSKY9X on Taranis
Is this it ?
RF Module Soft Power Switch for AR9x, Skyboard, 9XR-PRO
(viewtopic.php?f=85&t=8471&hilit=9xrpro+switch+module).
RF Module Soft Power Switch for AR9x, Skyboard, 9XR-PRO
(viewtopic.php?f=85&t=8471&hilit=9xrpro+switch+module).
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: ERSKY9X on Taranis
antlerhanger wrote: ↑Sat Feb 23, 2019 2:33 pm Yes on both...I found your thread on the switch ..I will probably be asking you questions tho
It is the link Bob posted just above. But you said above that you found the thread about the switch and I thought it wasn't necessary to post the link to it anymore
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: ERSKY9X on Taranis
Yes that is it . Thank you . I did say that and I thought I had it saved in favorites but of course I didn't . I need to order some stuff
Thanks
Allen
Thanks
Allen
Re: ERSKY9X on Taranis
Let me know if you need help..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 238
- Joined: Tue Dec 25, 2018 3:19 am
- Country: United States
Re: ERSKY9X on Taranis
I'm know I will need your help..You've bailed me out of mistakes many times
Allen
Allen
-
- Posts: 9
- Joined: Wed Sep 18, 2013 10:10 pm
- Country: -
Re: ERSKY9X on Taranis
Hi, it's possible to flash frsky receivers like the OPenTX does?
I mean using the module bay and the microSD.
https://www.youtube.com/watch?v=20jJE25-GC4
I mean using the module bay and the microSD.
https://www.youtube.com/watch?v=20jJE25-GC4
-
- Posts: 9
- Joined: Wed Sep 18, 2013 10:10 pm
- Country: -
Re: ERSKY9X on Taranis
Found it: viewtopic.php?p=142877#p142877GhostMasterPT wrote: ↑Sat Mar 02, 2019 11:42 pm Hi, it's possible to flash frsky receivers like the OPenTX does?
I mean using the module bay and the microSD.
https://www.youtube.com/watch?v=20jJE25-GC4
-
- Posts: 16
- Joined: Sun Jul 10, 2016 11:15 am
- Country: -
Re: ERSKY9X on Taranis
Guys were can I find this option:
"XJT module has "double rate" option to reduce latency"
Shall I enable it to reduce latency?
I am using r221 final version
Thanks
"XJT module has "double rate" option to reduce latency"
Shall I enable it to reduce latency?
I am using r221 final version
Thanks
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: ERSKY9X on Taranis (reduce latency with XJT module)
I remember something about that several years ago.
The reduce latency info may be in the manual for the receiver and so maybe not in one of the old XJT manuals.
The reduce latency info may be in the manual for the receiver and so maybe not in one of the old XJT manuals.
Last edited by bob195558 on Tue Mar 12, 2019 11:16 am, edited 1 time in total.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
Re: ERSKY9X on Taranis
In the protocol menu you can activate.
I guess after should rebinding the receiver.
I'm using beta r222d4 firmware.
I guess after should rebinding the receiver.
I'm using beta r222d4 firmware.
Last edited by budavaril on Tue Mar 12, 2019 9:44 am, edited 1 time in total.
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X on Taranis
I added this in "ersky9xProvR222a7", so you need to have flashed that, or a later, test version.
No rebinding is necessary.
Mike
No rebinding is necessary.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 16
- Joined: Sun Jul 10, 2016 11:15 am
- Country: -
Re: ERSKY9X on Taranis
Updated with last test version and going to test it tomorrow
Considering that I am already using 8ch how much latency decrease should I expect from this if any?
Thanks
Considering that I am already using 8ch how much latency decrease should I expect from this if any?
Thanks
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X on Taranis
Probably none if using 8ch mode.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 16
- Joined: Sun Jul 10, 2016 11:15 am
- Country: -
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X on Taranis
Is that using SBUS or servo outputs?
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 16
- Joined: Sun Jul 10, 2016 11:15 am
- Country: -
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: ERSKY9X on Taranis
I don't know, I've not done any latency testing with the R9M.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 16
- Joined: Sun Jul 10, 2016 11:15 am
- Country: -
Re: ERSKY9X on Taranis
I got a reply from Frsky:
"Hi Andre,
Thanks contact us, the R9M module don't support 9ms packets like the built-in 2.4Ghz XJT module of the transmitter.
Best regards
Ray"
"Hi Andre,
Thanks contact us, the R9M module don't support 9ms packets like the built-in 2.4Ghz XJT module of the transmitter.
Best regards
Ray"
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
ERSKY9X on Taranis
ERSkyTX on the new Taranis X9-Lite - first flights.
Three flights on my Durafly Tundra with the new radio.
I’m liking the feel of the radio - compact with very decent sticks. Lighter and more comfortable than the QX7.
Using RX6R with ACCESS firmware.
Three flights on my Durafly Tundra with the new radio.
I’m liking the feel of the radio - compact with very decent sticks. Lighter and more comfortable than the QX7.
Using RX6R with ACCESS firmware.