No throttle
No throttle
I am a Newbie. I have a new Tower Hobbies Hellcat. I have a new Taranis QX7. I have a new FrSky X8R receiver. I have done the bind procedure after setting everything up. My Elevator control works, my Ailerons work, and my Rudder works, but not the Throttle. Does anyone have any ideas?
-
- Posts: 750
- Joined: Tue Dec 27, 2011 11:22 pm
- Country: United States
- Location: Carson City, Nv
Re: No throttle
Two viable candidates are
Bad calibration of throttle channel
and
Maybe you gave a throttle cut set on a new model.
The easiest way to get help is probably to post your .otx so someone can see if there is a setup error.
Bad calibration of throttle channel
and
Maybe you gave a throttle cut set on a new model.
The easiest way to get help is probably to post your .otx so someone can see if there is a setup error.
Dean
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
OldDmbThms: 1. Takeoff, 2. Crash, 3. Repair, GOTO 1
-
- Posts: 4
- Joined: Wed Mar 27, 2019 1:45 pm
- Country: -
Re: No throttle
I ran into the same issue with this model, it was a calibration issue. It's easier to mess up than you'd imagine, and it's behind most issues you'll run into!
... Or that's just me being clumsy and always messing up calibration.
... Or that's just me being clumsy and always messing up calibration.