Model transfer between radio's useing Bluetooth ?

Hardware Support for the 9XR Pro
Post Reply
antlerhanger
Posts: 238
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Model transfer between radio's useing Bluetooth ?

Post by antlerhanger »

Is there a way to copy Models between 9xr pro transmitters using Bluetooth ? I'm running ersky9xr latest test version . I have 3 pro's all with the bt installed and working (hc-05 ) as master or slave. It would be fantastic if this is possible.
Thanks once again
Allen

User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Model transfer between radio's useing Bluetooth ?

Post by jhsa »

have a look, just made this. I hope it helps :)

https://www.youtube.com/watch?v=xG194ryw38Q

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
antlerhanger
Posts: 238
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Model transfer between radio's useing Bluetooth ?

Post by antlerhanger »

When I press run script , I have no files there to choose from .
It's just blank ..I'm sure its some setting I have wrong
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Model transfer between radio's useing Bluetooth ?

Post by jhsa »

You probably don't have any model files on the SD Card. Try backing up some models first. On both radios, so the "Models" folder is created.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Model transfer between radio's useing Bluetooth ?

Post by MikeB »

You also need the files filet.bas and filer.bas in a "\Scripts" directory on the SD card.
I've just added them on http://www.er9x.com/, see the link to "File Transfer" under scripts on the right side.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

antlerhanger
Posts: 238
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Model transfer between radio's useing Bluetooth ?

Post by antlerhanger »

You guys are AMAZING ..It works perfect !! I had to remember to go to bt settings and change to script..But it works fantastic
Thanks Again
Allen
antlerhanger
Posts: 238
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Model transfer between radio's useing Bluetooth ?

Post by antlerhanger »

I had model files but needed the 2 files for the script ..Tested all 3 radio's and they work perfect
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Model transfer between radio's useing Bluetooth ?

Post by jhsa »

Great :) I believe you can also share voice files..

Mike, didn't you say that you have combined both "Filer.bas and Filet.bas"?? If you did, have you posted the new file??

Thanks

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
antlerhanger
Posts: 238
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Model transfer between radio's useing Bluetooth ?

Post by antlerhanger »

So I added scripts to the file directory . I found out I also needed modelNames under voice ..What are the exact file directories to have on the sd card ?

All is working great thanks to you guys ,Just want to make sure I have everything

Thanks

Allen
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Model transfer between radio's useing Bluetooth ?

Post by jhsa »

I would post a picture of my radio's folders but It seems i cannot upload files to the forum.. :(

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Model transfer between radio's useing Bluetooth ?

Post by MikeB »

Yes I do have a single script that does both Tx and Rx. I will get around to posting it soon!
I have just managed to implement a new feature for this operation that will be in the next test version I post. If you use the file transfer script(s), and don't have either the COM2 function set to script or the bluetooth function set to script, then the bluetooth function will be temporarily change to "Script" so you may transfer the file(s), and it will change back to the original setting when the script terminates.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Model transfer between radio's useing Bluetooth ?

Post by jhsa »

Mike, on my radios bluetooth is on COM3, including the 9Xtreme (COM3 is I2c). Do you mean only the function will change temporarily, or also the COM port.
If the COM port also changes, I think it won't work on my radios.

I have COM1 for external modules, COM2 for internal modules and BT on COM3.
Changing function automatically is a great feature..
Thanks

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
antlerhanger
Posts: 238
Joined: Tue Dec 25, 2018 3:19 am
Country: United States

Re: Model transfer between radio's useing Bluetooth ?

Post by antlerhanger »

My 3 radios have BT on com 3 ,com1 external and com 2 For internal

Allen
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Model transfer between radio's useing Bluetooth ?

Post by MikeB »

No change to the COM ports, just the BT Function changes.
You have an option to use COM2 for scripts, if it is available, so you may connect two radios together using COM2 to transfer files.
If COM2 is NOT set to "Script", it won't be used.
If COM2 is set to "Script" and bluetooth is not set to script then COM2 is used.
If both are set to "Script", then BT is used.
If neither is set to "Script", then this change will temporarily set BT to script as soon as you try to receive anything in the script.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Model transfer between radio's useing Bluetooth ?

Post by jhsa »

Cool, thanks Mike.. It is fully automatic now then :)
So, we can have BT set to whatever function we use it for, but when sending/receiving files , ersky9x will configure it to script, and change it back when finished.. Fantastic :)

Thank you

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

Post Reply

Return to “Turnigy 9XR PRO radio”