![Smile :)](./images/smilies/icon_e_smile.gif)
João
You will need to have bluetooth on the computer as well obviously
Please check that again. I believe that is the little track I was saying that should be cut on one of my posts. You certainly do not want VCC on pin 34 and on the radio through that EN connection..Again, I did not cut any track in the back... Not sure how important it is...
EDIT 2: I took a closer look at the bluetooth module, and one part of the EN definitelly connects to the VCC pin
Due to I removed the switch, it seems the EN is not connected to the VCC anymore. With the small switch in place it would be another story.