Ersky9x Bug Reporting
- MikeB
- 9x Developer
- Posts: 18002
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
A9 now posted with that problem fixed.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
Thank you..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 143
- Joined: Sat Dec 02, 2017 10:32 am
- Country: United Kingdom
- Location: Nottingham, UK
- Contact:
Re: Ersky9x Bug Reporting
Thanks Mike,
Tested and working fine.
Leigh
Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
Current Kit:-
Taranis X9D plus running ErSkyTx - main radio.
Turnigy 9XR-Pro with internal FrSky DHT Module - used on the simulator.
Retired radios:-
Turnigy i10 with FlySky receivers.
Turnigy I6 - My first Tx now just used on Quads.
Re: Ersky9x Bug Reporting
Is it possible that modern ersky9x doesn't like voice files with 128kbps bitrate?
There's a Russian sound pack that works well with r219, but not-so-well with modern versions (including the recent betas). Specifically, the model battery voltage alarm doesn't pronounce the digits - the radio just says 'Volts', but not the digits. When sound pack is replaced with the English version, everything works just as expected.
I didn't test it on my own radio yet (need a day or two to get to it). But it looks like the only difference is that Russian voice files are 128kbps, and English ones are 256kbps.
P.S. The 'problematic' sound pack can be downloaded from here: http://rcgear.ru/files/voice_pack_rus_e ... e_v1.0.zip
There's a Russian sound pack that works well with r219, but not-so-well with modern versions (including the recent betas). Specifically, the model battery voltage alarm doesn't pronounce the digits - the radio just says 'Volts', but not the digits. When sound pack is replaced with the English version, everything works just as expected.
I didn't test it on my own radio yet (need a day or two to get to it). But it looks like the only difference is that Russian voice files are 128kbps, and English ones are 256kbps.
P.S. The 'problematic' sound pack can be downloaded from here: http://rcgear.ru/files/voice_pack_rus_e ... e_v1.0.zip
Re: Ersky9x Bug Reporting
You actually have files that are 128Kb/s, like the numbers for example,and others that are 352Kb/s, like "Volts", "AMP", etc.
About the same time Mike implemented the music player, he also improved the voice system, and all voice and music files should be 16Khz 16bit .wav files. So, you will probably have to convert the pack and see if it works..
João
About the same time Mike implemented the music player, he also improved the voice system, and all voice and music files should be 16Khz 16bit .wav files. So, you will probably have to convert the pack and see if it works..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
Here, try these.. I've converted the files you've just posted..
João
João
- Attachments
-
- voice russian converted.zip
- (6.49 MiB) Downloaded 326 times
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
Thanks, João!
It will likely work (still can't test it myself, but I'll ask the guy who actually found this issue).
I was just wondering whether this is a bug or a feature.
I have no problems "upscaling" the voice files to 256kbps. If that's what ersky9x expects - fine with me!
It will likely work (still can't test it myself, but I'll ask the guy who actually found this issue).
I was just wondering whether this is a bug or a feature.
I have no problems "upscaling" the voice files to 256kbps. If that's what ersky9x expects - fine with me!
Re: Ersky9x Bug Reporting
I wouldn't look at the 256Kp/s number..
You need to tell the audio program to save the files as 16Khz 16bit. This is important.
Some of your files (numbers for example), at 128Kb/s were 16Khz, so i suppose they are only 8bit files. I think this is too low, and it might be the reason they are not playing. mike could confirm this of course.
Some of your files are 22Khz, so also not adequate.
As far as I know, there are no bugs with the voicing system at the moment.
As I mentioned above, changes were made to improve it..
João
You need to tell the audio program to save the files as 16Khz 16bit. This is important.
Some of your files (numbers for example), at 128Kb/s were 16Khz, so i suppose they are only 8bit files. I think this is too low, and it might be the reason they are not playing. mike could confirm this of course.
Some of your files are 22Khz, so also not adequate.
As far as I know, there are no bugs with the voicing system at the moment.
As I mentioned above, changes were made to improve it..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
The converted sound pack is confirmed to work fine!
Thanks again, João!
Thanks again, João!
Re: Ersky9x Bug Reporting
There you go, that was the problem
I think the number files were only 8 bit, and that is why they didn't work..
Happy to help, always
João
I think the number files were only 8 bit, and that is why they didn't work..
Happy to help, always
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
You're right! I checked the 'source' Nxx files and they were really 8bit.
I should have checked that before posting...
Thanks again!
I should have checked that before posting...
Thanks again!
Re: Ersky9x Bug Reporting
First of all - thank you Mike and everyone else for developing and contributing to this great project
Having said that I would like to report a potential bug with trim switches on my FS-TH9x with AR9x board running ersky9xProvR222b9.
So I want to use some of the trim switches for multiple functions in different modes.
I set-up Aileron and Elevator trim switches to function as trims for CH5 and CH6 via global variables: Then I set-up CH7 and CH8 to use Atu, Atd, Etu, Etd switches as momentary switches (assigned to a separate flight mode): This works fine most of the time - I can trim the channels and then use the same switches as momentary switches.
However when I trim up or down to zero, stop, then switch the mode - CH7 or/and CH8 are immediately set to high or low (depending which switch I used to trim to zero) and stay there. I can reset it by pressing one of the trim switches and after that it functions correctly, until next time I repeat these actions. It's as if trim up or down 'event' latches after trimming up or down to zero and later activates the next assigned function to it.
If you have no idea what I'm talking about I took this video to show the problem: https://youtu.be/bEn4zLTVVx4
I have also attached eePsky model file with my setup. Maybe I'm doing something incorrectly?
Thanks for the help!
Having said that I would like to report a potential bug with trim switches on my FS-TH9x with AR9x board running ersky9xProvR222b9.
So I want to use some of the trim switches for multiple functions in different modes.
I set-up Aileron and Elevator trim switches to function as trims for CH5 and CH6 via global variables: Then I set-up CH7 and CH8 to use Atu, Atd, Etu, Etd switches as momentary switches (assigned to a separate flight mode): This works fine most of the time - I can trim the channels and then use the same switches as momentary switches.
However when I trim up or down to zero, stop, then switch the mode - CH7 or/and CH8 are immediately set to high or low (depending which switch I used to trim to zero) and stay there. I can reset it by pressing one of the trim switches and after that it functions correctly, until next time I repeat these actions. It's as if trim up or down 'event' latches after trimming up or down to zero and later activates the next assigned function to it.
If you have no idea what I'm talking about I took this video to show the problem: https://youtu.be/bEn4zLTVVx4
I have also attached eePsky model file with my setup. Maybe I'm doing something incorrectly?
Thanks for the help!
- Attachments
-
- TrimTest.eepm
- Ersky9X model file
- (4.13 KiB) Downloaded 313 times
- MikeB
- 9x Developer
- Posts: 18002
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
I can re-produce the problem, it may take a while to pin this down. It is likely it may be caused by the way trims stop moving at 0, something in the de-bouncing may be left set causing the switch to appear on when it is off.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
No problem, Mike, thanks for looking into it!
- MikeB
- 9x Developer
- Posts: 18002
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
I've just posted provisional R222(c1) with this fixed.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
Awesome, that didn't take long at all, it's working fine now, thanks!
Re: Ersky9x Bug Reporting
Mike, Today I did test the shutdown warning as I was distracted enough to stupidly turn my radio OFF by mistake while the model was still ON
Radio was the 9xtreme. And I am a bit concerned about what I saw.
When I turned the radio OFF, it did warn me, I then turned it ON again immediately. The screen remained on the warning, and the only possibility was to press any key. But then, instead of returning to the normal screen, it continued with the shutdown sequence to turn OFF before it turned ON again. So, the model did lose connection with the radio, and that shouldn't happen?? Is it possible to interrupt the shutdown sequence if the radio's power switch is turned ON again before pressing a key??
Thanks
João
Radio was the 9xtreme. And I am a bit concerned about what I saw.
When I turned the radio OFF, it did warn me, I then turned it ON again immediately. The screen remained on the warning, and the only possibility was to press any key. But then, instead of returning to the normal screen, it continued with the shutdown sequence to turn OFF before it turned ON again. So, the model did lose connection with the radio, and that shouldn't happen?? Is it possible to interrupt the shutdown sequence if the radio's power switch is turned ON again before pressing a key??
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18002
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
Well, the warning worked!
I put that in with the intention that if you turned the Tx off, then you would realise the Rx was still on, so turn that off, at which point the Tx will then go off. I had assumed that if you were turning the Tx off, then you would want the Rx off anyway!
This was clearly better than no warning at all!
Also, with some radios (SKY, AR9X, 9XR-PRO) turning the power switch off normally powers the Tx module off as well, so you just get a warning reminding you to turn the Rx off (although that may not work as well as it could as you lose the RSSI as soon as the module goes off).
Anyway, I've just tested a change for the 9Xtreme (should work on Taranis as well, QX7, X9E, XLITE and Horus will need further checking).
If you turn the power off with the Rx on, you get the warning. Pressing any key and the Tx powers off. If, however, you turn the power back on, the radio resumes normal operation, leaving the warning screen.
This will be in the next test version.
Mike
I put that in with the intention that if you turned the Tx off, then you would realise the Rx was still on, so turn that off, at which point the Tx will then go off. I had assumed that if you were turning the Tx off, then you would want the Rx off anyway!
This was clearly better than no warning at all!
Also, with some radios (SKY, AR9X, 9XR-PRO) turning the power switch off normally powers the Tx module off as well, so you just get a warning reminding you to turn the Rx off (although that may not work as well as it could as you lose the RSSI as soon as the module goes off).
Anyway, I've just tested a change for the 9Xtreme (should work on Taranis as well, QX7, X9E, XLITE and Horus will need further checking).
If you turn the power off with the Rx on, you get the warning. Pressing any key and the Tx powers off. If, however, you turn the power back on, the radio resumes normal operation, leaving the warning screen.
This will be in the next test version.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
Thanks Mike.. The thing is, it was really a stupid situation, you know, one of those where our brain just goes dead for a moment, and then disaster happens.. I was configuring the trainer setup between my radio and my son's and wanted to turn his radio OFF, but ended up turning my own radio OFF.. they are both 9x radios
Would it be possible to add also to the Ar9x, as I have the soft power circuit, and the module won't turn off unless the shutdown sequence is complete??
Thanks
João
Would it be possible to add also to the Ar9x, as I have the soft power circuit, and the module won't turn off unless the shutdown sequence is complete??
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18002
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
I may be able to add it for the AR9X/SKY/9XR-PRO, but I have to make sure it works with unmodified radios as well as yours!
What happens, currently, on your AR9X board if you power it off with the Rx still on?
Mike
What happens, currently, on your AR9X board if you power it off with the Rx still on?
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
Mike, I won't be able to check that until tomorrow evening. Will do as soon as I get home..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
Mike, I have just checked. a the moment the module turns off as soon as I switch the radio OFF. I have a switch board that I developed that keeps the radio and module ON if the switch goes bad. But as far as I remember, it turns the module OFF if the switch is turned OFF. This means I will probably have to take the power for the modules from the same place that powers the radio..
Will need some time to review the schematics from my switch board and change it accordingly. Thanks..
João
Will need some time to review the schematics from my switch board and change it accordingly. Thanks..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
In my radio not working inactivity alarm. Can this check? Other voice function works fine.
Re: Ersky9x Bug Reporting
Which radio, which firmware and version?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
Ar9x revision B firmware 222RC5 and older. When this problem arose I can't say.
Re: Ersky9x Bug Reporting
Make sure you have a file in the SD Card "Voice / System" folder with the name "INACTV.wav"
Also check your settings in "Radio Setup / Alarms", and make sure the option " Inactivity Alarm" is set to other than "0m" (minutes), and the Volume is also set higher..
João
Also check your settings in "Radio Setup / Alarms", and make sure the option " Inactivity Alarm" is set to other than "0m" (minutes), and the Volume is also set higher..
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
Wonderful Well done
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18002
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
I'll do a check because, in theory, if the file is missing it should play a sound anyway.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
I just updated my 9xr pro from b6r222 to c5r222 and now when I switch off the transmitter, before shutting down I give that RX still on warning message. Even if no JR modul in the transmitter. With b6 I got this message just if my RX was connected and really forgot powered on.
Sent from my SM-G920F using Tapatalk
Sent from my SM-G920F using Tapatalk