Timer Count Down Value Change Requires Reboot

openTx has introduced a range of new features, ideas and bling. It is fast becoming the firmware of choice for many users. openTx will run on ALL current hardware platforms, including the gruvin9x and sky9x boards. Work has already started to support the new FrSky X9D radio!
Post Reply
User avatar
rcdiy
Posts: 190
Joined: Fri Jul 01, 2016 6:13 am
Country: Canada
Contact:

Timer Count Down Value Change Requires Reboot

Post by rcdiy » Tue May 15, 2018 10:56 pm

I’ve noticed that when the timer count down value is changed say from 6:00
to 3:00 it does not take effect till either a flight reset is done or a power cycle.

Is this the correct behaviour or a bug?

I fly with two battery sizes. When I changed to the smaller battery I reduced the timer but the countdown started from the older higher value.

2.2.1
X9D
RCdiy.ca
Stay Safe & Have Fun
OpenTX Manual http://rcdiy.ca
Paying it forward by sharing my Lua scripts, documentation and videos.

User avatar
Kilrah
Posts: 9602
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: Timer Count Down Value Change Requires Reboot

Post by Kilrah » Wed May 16, 2018 8:36 am

It's normal to require a reset of that timer to the new value, you wouldn't want a change (potentially accidental) to automatically overwrite the current value.

A reboot or full "flight reset" is obviously not needed though, jsut resetting that particular timer.

Post Reply

Return to “openTx”