I have experienced and enjoyed the companion9x versions for a while with a 9xr radio, and now i am trying to expand my horizons with a 9rx pro radio (please don't laugh). While totally different approach to flashing (some long evenings of ) and new to voice setup ( ) i did finally manage to comb through the forums to somewhat setup the 9xr pro radio to my liking. My question is - i did download a firmware build with gvars and I hope that this stands for "global variables" for the radio but when i run companion 2.1.9 there is no global var page, I don't mind manually setting them using the radio but am i missing a setting somewhere?
My other issue is with timer 1. For some reason this one has a mind of its own, although i set it to manual reset i cannot figure out how to accomplish that task. Just like my 9xr i configured the 9xr pro for dual timers - 1thr% and 2tht. I am not able to reset timer 1 once started and i will not be able to set it back to any preset value even when it is stopped and i change its setting in model setup. if i cycle the power on the radio, it remembers when it was left at. When i disable it by turning it off in settings and then restore it, it still remembers its last value. I did notice that when set to th% it does behave like my 9xr slowing down and speeding up according to throttle setting, but still I am not able to reset it by any button or combination of. Am i missing something ? how can i reset it ? - thank you in advance for any help
I would be at ver 2.2.1 but have read too many issues with the avr radios, (thus 2.21 AVR disabled ver. is out) and when i tried ver 2.2.1 initially i too got the samba errors with corrupted eeprom messages and since i have a avr128 radio I decided to keep a common platform.
9xr pro - opentx 2.19 clarifications
Re: 9xr pro - opentx 2.19 clarifications
GVARS are under flight modes in companion.
Timer gets reset from the Reset menu you access with a short MENU press on the home screen.
Timer gets reset from the Reset menu you access with a short MENU press on the home screen.
Re: 9xr pro - opentx 2.19 clarifications
ahhh - another mystery solved - on the xr all I had to do is long press the exit button to rst both timers.
As for the g-vars - sorry I ment global functions in the radio setup screens, but that is good to know also.
Thank you for your help
As for the g-vars - sorry I ment global functions in the radio setup screens, but that is good to know also.
Thank you for your help
Re: 9xr pro - opentx 2.19 clarifications
That's in "edit radio settings" then.
Re: 9xr pro - opentx 2.19 clarifications
that one i have not found - edit settings has radio profile, application settings and simulator settings.
As for the radio profile it has very little settings other than radio type, lang, build opt, splash screen , couple folder paths, stick pref and firmware write.
There is a general settings comment above stick mode that states that it is empty - but i have not found any other radio settings page nor how to satisfy this comment.
As for the radio profile it has very little settings other than radio type, lang, build opt, splash screen , couple folder paths, stick pref and firmware write.
There is a general settings comment above stick mode that states that it is empty - but i have not found any other radio settings page nor how to satisfy this comment.
Re: 9xr pro - opentx 2.19 clarifications
sorry for the repeat - slow connection i guess - didn't think i submitted 1st time
Re: 9xr pro - opentx 2.19 clarifications
Big enough though...
Re: 9xr pro - opentx 2.19 clarifications
sorry thanks - i found it - under 2.2 you have that option but in the 2.1ver you have to double click on general settings in the model build menu, not intuitive, hence i am guessing the visual change in the new ver. Awesome !!!