Ersky9x Bug Reporting
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
Working OK for me (on g3).
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
will load g3 and try
Thanks
João
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
ok, flashed g3. same problem, but I have some more details.
The problem is there when editing PB3 and PB4.
All the other switches I seem to be able to edit without problems..
Thanks
João
The problem is there when editing PB3 and PB4.
All the other switches I seem to be able to edit without problems..
Thanks
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
OK, I can see the problem. A temporary workaround is to turn off "Menu Only Edit" while you edit those two items.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
Thanks Mike.. As far as I am concerned I don't need to do it. I was just trying to help the other user yesterday that wanted to know if it was possible to use all EXT pins on the 9XT..
It is quite difficult to detect bugs in the Hardware menu because we normally don't need to go there unless we install new hardware..
Thank you
João
It is quite difficult to detect bugs in the Hardware menu because we normally don't need to go there unless we install new hardware..
Thank you
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
There is a small flaw in the "Edit Mix" menu.
While all field names are displayed in mixed case, the name for the flight modes is displayed in upper case as "MODES" (Er9x as well)
The call in menuProcMixOne contains a literal string "MODES" instead of the defined 'variable' STR_MODES
Reinhard
While all field names are displayed in mixed case, the name for the flight modes is displayed in upper case as "MODES" (Er9x as well)
The call in menuProcMixOne contains a literal string "MODES" instead of the defined 'variable' STR_MODES
Reinhard
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
OK, fixing both!
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
Thanks
Reinhard
Reinhard
Re: Ersky9x Bug Reporting
I am having an issue with latest firmwares. I have a model witch uses frsky compatible rx. So on my 9x with 9xtreme board and xjt module I usually set it on xjt protocol and d8 mode and everything works.
On versions g5, g2, and g1 I lose connectivity. Rx is still bound but channels don't move.
On f4 everything works.
On g5 version to make it work I need to mess with dip switches on the back of xjt (to set mode d8) and set protocol to ppm rather than xjt to gain connectivity again
Στάλθηκε από το MI 6 μου χρησιμοποιώντας Tapatalk
On versions g5, g2, and g1 I lose connectivity. Rx is still bound but channels don't move.
On f4 everything works.
On g5 version to make it work I need to mess with dip switches on the back of xjt (to set mode d8) and set protocol to ppm rather than xjt to gain connectivity again
Στάλθηκε από το MI 6 μου χρησιμοποιώντας Tapatalk
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
OK, I've found the problem, I'll get 'g7' up on er9x.com in a few minutes, just building it.
Mike
Posted on www.er9x.com
Mike
Posted on www.er9x.com
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
Thank you
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Ersky9x Bug Reporting
It has been over a year now since the official release of R220. Since then there has been a myriad of fixes and improvements which are/will be welcome to many users.
Most of the followers of this forum are obviously enthusiastic beta testers who are to be commended for their work without which no progress would be made.
The quality and quantity of features and fixes that Mikes provides to us is amazing. However, as a retired software development manager, I know there is a natural tendancy for developers to always want to add "just 1 more fix or feature" to a patch or release
So, could I respectfully suggest that it is time to draw a line and release an official R221 for general availability?
Most of the followers of this forum are obviously enthusiastic beta testers who are to be commended for their work without which no progress would be made.
The quality and quantity of features and fixes that Mikes provides to us is amazing. However, as a retired software development manager, I know there is a natural tendancy for developers to always want to add "just 1 more fix or feature" to a patch or release
So, could I respectfully suggest that it is time to draw a line and release an official R221 for general availability?
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
Indeed, I've been trying to get to that point. One "problem" is I need to get someone else to build eepskye for the MAC, so need to "freeze" everything while this is done.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
As far as I know, you need QTCreator installed on the MAC, then just get the latest source files from the Github repository (Master branch), and build the project "eepskye".
The usual person who does this has said he will be able to do the build at the weekend.
Mike
The usual person who does this has said he will be able to do the build at the weekend.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
following changes had to be done to make it compile...
added
#include <QDoubleSpinBox> to "modeledit.h"
added
#include <QCheckBox> to "loggingDialog.h"
wasn't sure what number to use for SVN_VER_NUM in stamp-eepskye.h, it is currently 421... let me know what you want for that.
file attached is actually "eepskye.dmg" needed to rename it to eepskye.hex to make it "attach" without complaining. rename to eepskye.dmg before attempting to use it.
added
#include <QDoubleSpinBox> to "modeledit.h"
added
#include <QCheckBox> to "loggingDialog.h"
wasn't sure what number to use for SVN_VER_NUM in stamp-eepskye.h, it is currently 421... let me know what you want for that.
file attached is actually "eepskye.dmg" needed to rename it to eepskye.hex to make it "attach" without complaining. rename to eepskye.dmg before attempting to use it.
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
I'll get those changes done so the repository is correct.
SVN_VER_NUM needs to be 422 in stamp-eepskye.h.
I think I need to put stamp-eepskye.h in the repository, it is normally created when I run a command line build for the Windows version, then used when I build the Linux version.
Regarding the Linux version, currently I can only build a 32-bit version (in a virtual box). I still need to create a 64-bit virtual box copy of Linux and install all the build requirements in it.
Mike
SVN_VER_NUM needs to be 422 in stamp-eepskye.h.
I think I need to put stamp-eepskye.h in the repository, it is normally created when I run a command line build for the Windows version, then used when I build the Linux version.
Regarding the Linux version, currently I can only build a 32-bit version (in a virtual box). I still need to create a 64-bit virtual box copy of Linux and install all the build requirements in it.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
attached is a new eepskye.dmg (renamed eepskye.hex) with SVN_VER_NUM set to 422
Re: Ersky9x Bug Reporting
Mike,
wasn't there also an issue with QT versions differing on the linux versions? either QT that ships with ubuntu 16.04 LTS was older or newer than what the download file expects... i remember having to compile my own to get it to run on Linux.
wasn't there also an issue with QT versions differing on the linux versions? either QT that ships with ubuntu 16.04 LTS was older or newer than what the download file expects... i remember having to compile my own to get it to run on Linux.
Re: Ersky9x Bug Reporting
one last note... I am compiling this with the latest QT for mac os, running on a mac mini with mac os X 10.9.5... there should be zero issues running that against all current versions of mac os x... anything prior to 10.7 will need a different binary... i do have a 10.6.8 mac with QT 4.x on it... i will compile a version of 422 there if anyone needs a copy.
Re: Ersky9x Bug Reporting
Mike,
built 422 for linux on ubuntu 16.04 64 bit with QT 5... had to make one single change to get it to compile:
line 9 of "modeledit.cpp"
#include "loggingdialg.h" ---> #include "loggingDialog.h"
it appears that both Mac OS and Windows being case insensitive file systems, they didn't care about the lower case D, but linux does.
built 422 for linux on ubuntu 16.04 64 bit with QT 5... had to make one single change to get it to compile:
line 9 of "modeledit.cpp"
#include "loggingdialg.h" ---> #include "loggingDialog.h"
it appears that both Mac OS and Windows being case insensitive file systems, they didn't care about the lower case D, but linux does.
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
R221 now released!
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
Re: Ersky9x Bug Reporting
Great news. Congratulations Mike.
Re: Ersky9x Bug Reporting
Thanks Mike.. Did you add or fix anything since last test version?
João
Sent from my BLN-L21 using Tapatalk
João
Sent from my BLN-L21 using Tapatalk
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
No.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
I have just downloaded the official release of ersky9x R221 for the 9XR Pro & flashed it to my radio. When I display the version it shows:
VERS: ersky9x-r221
DATE: 19:02:2018
TIME: 10:33:12
MOD: REVB-X
Why is the date 19 Feb?? Was the Windows binary created a little earlier than the Mac and Linux binaries?
.rs
Last edited by rsilk49 on Fri Mar 02, 2018 12:52 pm, edited 1 time in total.
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
I built ersky9x then, but I had to wait for eepskye to be built for the MAC before I could do the release of both ersky9x and eepskye together.
Mike
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
Congratulations on the gold release!
Whenever my team released a new product or major version, I would take the entire team out for dinner. So, I would hope the R&D director would do the same for the ersky team
Whenever my team released a new product or major version, I would take the entire team out for dinner. So, I would hope the R&D director would do the same for the ersky team
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R
- MikeB
- 9x Developer
- Posts: 18010
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Ersky9x Bug Reporting
Could you post the resulting, 64-bit build please, or send it to me via a PM?tsenecal wrote: ↑Sun Feb 25, 2018 6:25 pm built 422 for linux on ubuntu 16.04 64 bit with QT 5... had to make one single change to get it to compile:
line 9 of "modeledit.cpp"
#include "loggingdialg.h" ---> #include "loggingDialog.h"
it appears that both Mac OS and Windows being case insensitive file systems, they didn't care about the lower case D, but linux does.
It seems it may be more popular than the 32-bit version.
Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Ersky9x Bug Reporting
Minor issues found in R221.
There is no help topic for "EEPROM". Radio Setup/EEPROM page shows "Disabled (see Help)"
Page name inconsistent with menu item - Menu "Radio Setup", page title "Radio SETUP".
There is no help topic for "EEPROM". Radio Setup/EEPROM page shows "Disabled (see Help)"
Page name inconsistent with menu item - Menu "Radio Setup", page title "Radio SETUP".
S500 + Pixhawk 1 clone + Mauch PM + C&T Telemetry adapter + 9XR-Pro (Taranis gimbals)/XJT/X8R