Horus X12S icons missing at top of screen
-
- Posts: 2
- Joined: Thu Oct 12, 2017 6:51 pm
- Country: -
Horus X12S icons missing at top of screen
So I'm new to the Horus X12S and I've been helping set one up. Initially everything looked good and we were getting familiar with it but at some point after we created a new model for our drone I noticed the top of the main screen no longer has any icons on it (see picture). This seems like a sign of something wrong but I can't find anything in the manual. We're still running the original OS but at firmware 1.4.02.
Any ideas?
Any ideas?
Re: Horus X12S icons missing at top of screen
You need to connect the radio via USB and update the resources on the internal memory (supplied in the same zip as the firmware)
Re: Horus X12S icons missing at top of screen
Exactly. Those files are in the firware zip file.
Last edited by OctavioS on Fri Oct 20, 2017 1:53 am, edited 1 time in total.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
-
- Posts: 2
- Joined: Thu Oct 12, 2017 6:51 pm
- Country: -
Re: Horus X12S icons missing at top of screen
Thanks, that turned out to be the problem.
-
- Posts: 2
- Joined: Sun Nov 05, 2017 3:36 am
- Country: -
Re: Horus X12S icons missing at top of screen
I updated firmware and have the same problem what is the recourse file?
Is it the bootload .dfu file? thats the only other file I can see.
Is it the bootload .dfu file? thats the only other file I can see.
Re: Horus X12S icons missing at top of screen
The contents of the FLASH folder.
Re: Horus X12S icons missing at top of screen
I am confused , Do you copy flash contents to which file on the Horus to solve this problem?
Re: Horus X12S icons missing at top of screen
When you connect the Horus via USB with no SD card installed you get a new disk drive on your computer. Copy the contents of the FLASH folder into that, overwriting what's existing.
Re: Horus X12S icons missing at top of screen
Thank you !
Re: Horus X12S icons missing at top of screen
I have horus x12s and having trouble with my gain values transferring to my micro beast . I'm using the orx transmitter module and all other functions work fine. just cant change gain. says 50% radio and has me in 100% rate mode in normal mode
-
- Posts: 1
- Joined: Sat Apr 14, 2018 11:11 pm
- Country: -
Re: Horus X12S icons missing at top of screen
I have just updated the firmware on my X12s and have the top row of icons missing.
I updated from 1.2.XX to 1.5.04.
I read below about downloading a flash file that was included in the firmware download but there is no flash file with 1.5.04.
I tried to download the flash file from the last upgrade that had a flash file attached (1.4.02(Beta)) and got the message "Not enough memory".
I deleted the files and replaced them with the files in 1.4.02 and all seems OK.
I did loose all my aircraft settings that I had but that is not an issue, easy to replace only had a few.
My question is "Is my Horus OK to go flying with?", "Have I done something that needs to be fixed and if so How do I fix this?"
Please if I can ask, I am a simple man If you can answer in a way I can easily understand.
Thanks
Dave B.
I updated from 1.2.XX to 1.5.04.
I read below about downloading a flash file that was included in the firmware download but there is no flash file with 1.5.04.
I tried to download the flash file from the last upgrade that had a flash file attached (1.4.02(Beta)) and got the message "Not enough memory".
I deleted the files and replaced them with the files in 1.4.02 and all seems OK.
I did loose all my aircraft settings that I had but that is not an issue, easy to replace only had a few.
My question is "Is my Horus OK to go flying with?", "Have I done something that needs to be fixed and if so How do I fix this?"
Please if I can ask, I am a simple man If you can answer in a way I can easily understand.
Thanks
Dave B.
- Attachments
-
- x12s.JPG (36.99 KiB) Viewed 9233 times
Re: Horus X12S icons missing at top of screen
I had the same issue updating my Horus X12S with the icon missing. FrSky is no longer including the FLASH directory with the image, or if they are they have forgotten to including the .gif files that populate parts of the screen. You will need to find an older version of Firmware like 1.4.04 and then copy the files from /FLASH/IMAGES/bitmaps to your Horus flash. Simply turn on your Horus (MAKE SURE THE HORUS IS POWERED ON), plug a USB cable into the back of the Horus and to your Windows computer (a USB logo should appear on the Horus screen), on your Windows computer you should see a USB Drive (x:) (drive letter is dependent on your system). Click on that drive and navigate to the IMAGES directory, now copy the missing "bitmap" directory here and when you restart your Horus the icons will appear on the banner.
Cheers,
Michael
Cheers,
Michael