eePskye crashes when connecting to 9XR Pro

ersky9xr is the port of the er9x firmware to the 9XRPRO radio.
Post Reply
stofferl
Posts: 11
Joined: Wed Jun 18, 2014 8:08 pm
Country: -

eePskye crashes when connecting to 9XR Pro

Post by stofferl »

Has anyone experienced an eePskye program Crash when connecting to the 9XR pro Transmitter? I can get it to work with my other two Notebooks running on Win7 32 bit and Win10 64 bit but not with my Desktop PC also on Win7 32 bit. The Transmitter is connected to the Computer as I see SD Card file and Flash file displayed. But clicking read Memory or read Firmware from TX in eePskye Closes the program and I get "eePskye has stopped working" every time...what could be causing this error?

Thanks in advance

Chris

User avatar
bob195558
Posts: 2377
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: eePskye crashes when connecting to 9XR Pro

Post by bob195558 »

What version of eePSkye do you have ?

erSky9x firmware and the newest PC eeprom editor eePSkye, find here if needed: (http://www.er9x.com/).
Also the test versions are good too "ersky9x and eepskye test versions".
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
stofferl
Posts: 11
Joined: Wed Jun 18, 2014 8:08 pm
Country: -

Re: eePskye crashes when connecting to 9XR Pro

Post by stofferl »

I have Revision 421 of eePskye...but I use the same on all Computers and on one it doesn't work, so shouldn´t be a Problem with the Software itself.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: eePskye crashes when connecting to 9XR Pro

Post by MikeB »

In the Burn|Configure menu, is "Use SAM-BA" ticked? If so, untick it.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
stofferl
Posts: 11
Joined: Wed Jun 18, 2014 8:08 pm
Country: -

Re: eePskye crashes when connecting to 9XR Pro

Post by stofferl »

Yes, sam-ba ist unticked, I use the same configuration as on my other Computers. I can only imagine it is some sort of incompatibility with other programs or Drivers.
Here are some Screen grabs:
Attachments
eepsky_samba_config.JPG
eepsky_error_1.JPG
eepsky_error_2.JPG

Post Reply

Return to “ersky9xr”