Hello i see that many flybarless (Spirit or Brain2) units for helis now have the ability to read the telemetry data directly (with the specific output cable) from some ESC that has integrated telemetry like Castle Creations Edge and Talon series or last HobbyWing ESC or Graupner ESC and transfer to TX telemetry. I'm asking if with openXsensor firmware there will be in the future the opportunity to read those data an translate them to for example s.port readable by OpenTX.
Let me know
Thanks
openxsensor reading data from ESC internal telemetry
Moderator: rainer
-
- Posts: 9
- Joined: Fri Aug 25, 2017 11:47 am
- Country: -
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: openxsensor reading data from ESC internal telemetry
First off, do you have any links to the format of the telemetry data available?
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 9
- Joined: Fri Aug 25, 2017 11:47 am
- Country: -
Re: openxsensor reading data from ESC internal telemetry
Hello Mike for Castle Creations telemetry ESC they have a public document about Link Live explaining the output protocol.
Here is the link:
http://www.castlecreations.com/castle-link-live
For Hobbywing i will try to write to their support and see if they can help.
Thanks and let me know if it will be possible to do it with the data provided by Castle.
Thanks
Here is the link:
http://www.castlecreations.com/castle-link-live
For Hobbywing i will try to write to their support and see if they can help.
Thanks and let me know if it will be possible to do it with the data provided by Castle.
Thanks
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: openxsensor reading data from ESC internal telemetry
Looks like that needs the throttle PPM signal to be proessed by the openXsensor.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: openxsensor reading data from ESC internal telemetry
Hi,
I've implemented Hobbywing V3/V4/V5 and PWM protocols in an arduino project. Not into the openxsensor project though
https://www.openrcforums.com/forum/view ... 84&t=11911
Castle link protocol will be added soon
Cheers,
Daniel
I've implemented Hobbywing V3/V4/V5 and PWM protocols in an arduino project. Not into the openxsensor project though
https://www.openrcforums.com/forum/view ... 84&t=11911
Castle link protocol will be added soon
Cheers,
Daniel