MULTIPROTOCOL support for openLRSng

Support and help for the OpenLRSng project.

Moderator: kha

Post Reply
mikeller
Posts: 26
Joined: Wed Dec 09, 2015 8:35 pm
Country: -

MULTIPROTOCOL support for openLRSng

Post by mikeller »

Hey guys.

I have added support for MULTIPROTOCOL to the openLRSng TX side:

https://github.com/openLRSng/openLRSng/pull/122

It supports serial RC data and telemetry, and in addition to this it supports the following functions on the RC controller:

- profile selection (via 'RxNum', 0 keeps the configured profile);
- high / low power; adjustable low power level (via 'Option', level 0 - 7, -1 keeps the configured level);
- binding;
- range check.

To configure it, you'll need a patched version of the configurator:

https://github.com/openLRSng/openLRSng- ... or/pull/30

Then select 'MULTI' in the 'Serial Baudrate' dropdown.

Currently it's only tested with orangeRx 1W TX, 9XR Pro, and ersky9x.
As always, feedback is appreciated.

zipray
Posts: 24
Joined: Sun Sep 04, 2016 9:05 am
Country: -

Re: MULTIPROTOCOL support for openLRSng

Post by zipray »

hi mikeller,This firmware need to hardware modification?
Post Reply

Return to “OpenLRSng”