Programming on the fly channel swap?
-
- Posts: 25
- Joined: Thu Jan 28, 2016 2:05 am
- Country: -
Programming on the fly channel swap?
Oh ersky9x gods help me. I am wondering if it is possible to have a pot change channel on the fly. I currently have a gimbal that supports 3 modes. I have the IDX 3 position switch set to the different modes. Is it possible for example to have pot1 output to channel 6 when in ID0 and switch to channel 7 when in ID1?
Re: Programming on the fly channel swap?
Yes, but what happen to channels 6 and 7 when the pot is not selected? Jump to a fixed position? If so, centre?
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 25
- Joined: Thu Jan 28, 2016 2:05 am
- Country: -
Re: Programming on the fly channel swap?
Centered if possible. Or no output and the gimbal will self center
Re: Programming on the fly channel swap?
Ok, simple..
CH6 100% P1 Switch (ID0)
CH7 100% P1 Switch (ID1)
When the switch id OFF the mix will be also OFF, that means the channel will center..
When the switch is on one of the positions, the mix will be on and the pot will control the channel.
For example, if you move the switch to ID2, both channels will center as they will be OFF.
João
CH6 100% P1 Switch (ID0)
CH7 100% P1 Switch (ID1)
When the switch id OFF the mix will be also OFF, that means the channel will center..
When the switch is on one of the positions, the mix will be on and the pot will control the channel.
For example, if you move the switch to ID2, both channels will center as they will be OFF.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 25
- Joined: Thu Jan 28, 2016 2:05 am
- Country: -
Re: Programming on the fly channel swap?
I really hate that it was that simple lol. Works thanks for the help
-
- Posts: 24
- Joined: Tue Apr 26, 2016 9:18 pm
- Country: United States
- Contact:
Re: Programming on the fly channel swap?
I think I just asked a similar question but was looking to have the 3 POS change channels when a 2 POS is activated. However, I would need the channel to NOT center when being changed, but to stay in the last used position for that channel.
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Programming on the fly channel swap?
CH6 100% CH6
CH6 R 100% P1 Switch (ID0) -- A "Replace" Multiplex
CH7 100% CH7
CH7 R 100% P1 Switch (ID1) -- A "Replace" Multiplex
Mike.
Edit: Corrected the second mix on channel 7 to a replace type.
CH6 R 100% P1 Switch (ID0) -- A "Replace" Multiplex
CH7 100% CH7
CH7 R 100% P1 Switch (ID1) -- A "Replace" Multiplex
Mike.
Edit: Corrected the second mix on channel 7 to a replace type.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Programming on the fly channel swap?
Clever.. And a good example for the manual..
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 1844
- Joined: Tue Dec 27, 2011 8:22 pm
- Country: -
- Location: Ottawa
-
- Posts: 24
- Joined: Tue Apr 26, 2016 9:18 pm
- Country: United States
- Contact:
Re: Programming on the fly channel swap?
Been trying to mess with this lately and have been able to kind of get it to work on the P1 Pot as the controlling switch, but I need this to work using the 3POS as the controlling switch and haven't been able to figure it out.
So for example:
If my GEAR switch is in position 1 = ID0, ID1, ID2 control channel 6
When I put the GEAR switch in position 2 = ID0, ID1, ID2 will now control channel 7 and channel 6 will stay in the last position I had it in before I changed the GEAR switch.
Based on the previous examples you guys have provided, I need to change the SOURCE from P1 to ID0 ID1 or ID2 but there is no option for that... unless I'm missing something?
Sent from my SM-N910V using Tapatalk
So for example:
If my GEAR switch is in position 1 = ID0, ID1, ID2 control channel 6
When I put the GEAR switch in position 2 = ID0, ID1, ID2 will now control channel 7 and channel 6 will stay in the last position I had it in before I changed the GEAR switch.
Based on the previous examples you guys have provided, I need to change the SOURCE from P1 to ID0 ID1 or ID2 but there is no option for that... unless I'm missing something?
Sent from my SM-N910V using Tapatalk
Re: Programming on the fly channel swap?
Try this:
CH6 100% CH6
R 100% sIDx Switch (!GEA) (The "R" means it is a replace mix)
CH7 100% CH7
R 100% sIDx Switch (GEA) (The "R" means it is a replace mix)
João
CH6 100% CH6
R 100% sIDx Switch (!GEA) (The "R" means it is a replace mix)
CH7 100% CH7
R 100% sIDx Switch (GEA) (The "R" means it is a replace mix)
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 24
- Joined: Tue Apr 26, 2016 9:18 pm
- Country: United States
- Contact:
Re: RE: Re: Programming on the fly channel swap?
Looks like that worked! The sIDx source was what I needed. Awesome!jhsa wrote:Try this:
CH6 100% CH6
R 100% sIDx Switch (!GEA) (The "R" means it is a replace mix)
CH7 100% CH7
R 100% sIDx Switch (GEA) (The "R" means it is a replace mix)
João
Thanks for all the help! [emoji106]
Re: Programming on the fly channel swap?
Glad it works
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
- MikeB
- 9x Developer
- Posts: 18000
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Programming on the fly channel swap?
In case you are not aware of it, it is possible to replace most of the 2-pos switches on the 9XR-PRO with 3-pos ones.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
-
- Posts: 5
- Joined: Mon Jul 11, 2016 8:56 pm
- Country: -
Re: Programming on the fly channel swap?
Is the same for a Taranis X9D+? For lines such as "R 100% sIDx Switch (!GEA)", is that a command or just a summary of what I would enter into Companion? Thanks!
Re: Programming on the fly channel swap?
This thread is about Ersky9x.
Companion is the eeprom editor for openTX. The programming might be different
João
Companion is the eeprom editor for openTX. The programming might be different
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW