Er9x test versions

er9x is the best known firmware. It has a superb range of features and is well supported by the community. Well worth trying out.
Post Reply
User avatar
MikeB
9x Developer
Posts: 15717
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Er9x test versions

Post by MikeB » Mon Nov 25, 2013 11:50 am

This is NOT intended as a thread for discussions, just as somewhere I can put test versions of er9x for people to try out.
The idea is I'll put a specific test version on here, with a reason why it is here. Later, when I have something else to test I'll remove that one and replace it with another.
This should stop lots of test versions all over the forum, and help avoid the forum taking up more space on the server than it needs to.

Mike.

NOTE: 08-Jan-2016, r820 is now released, also eepe r419.
er9xProv822j.zip
19-Sep-2018 17:47
128 and 2561, Fix R9M power options
(990.81 KiB) Downloaded 18 times
er9xProv822h.zip
08-Sep-2018 16:49
Add Hitec multi protocol
For '128/'2561, add voice 74 and 74 for throttle and switch warning
(990.75 KiB) Downloaded 24 times
er9xProv822g.zip
09-Aug-2018 11:37
Add R9M support
Add more Multi protocols
(990.71 KiB) Downloaded 97 times
er9xProv822f.zip
11-Apr-2018 23:44
FIx bug in timer trigger switch setting when extra PB is used.
Includes eepe.exe with a similar fix.
(2.35 MiB) Downloaded 230 times
er9xProv822e-128-2561.zip
13-Mar-2018 13:07
For '128 and '2561 add custom names for flight modes
Test version for '128 and '2561 processors
with ability to set Failsafe from the Tx
with both FrSky and Multi protocols
(274.84 KiB) Downloaded 136 times
er9xProv822d-128-2561.zip
11-Mar-2018 21:51
Test version for '128 and '2561 processors
with ability to set Failsafe from the Tx
with both FrSky and Multi protocols
There just isn't any spare flash space in the
'64 processor to add failsafe to those versions
V1 and V2 with eepe/eepeV2 as needed
(3.21 MiB) Downloaded 84 times
er9x-2561K1.zip
03-Nov-2017 15:11
Test version for kmargos (2561)
(88.91 KiB) Downloaded 350 times
eepe.zip
25-Jan-2017 23:21
2nd attempt to fix related switch defaults bug!
(1.37 MiB) Downloaded 959 times
eepe.zip
25-Jan-2017 18:30
Fix related switch defaults bug!
(1.37 MiB) Downloaded 211 times
eepe.zip
24-Jan-2017
Fix switch defaults bug
(1.37 MiB) Downloaded 192 times
er9xProv822a.zip
15-Jan-2017 23:08
More Multi text added
(977.29 KiB) Downloaded 584 times
er9x-128.zip
10-Nov-2016 22:59
'128 only, add "HuBRAW" processing
(87.93 KiB) Downloaded 396 times
er9x-frsky-olrsFix.zip
04-Nov-2016 12:22
Possible fix for telemetry problem when using Orange lrs
(73.36 KiB) Downloaded 251 times
er9xProv821g_multiDSM-2.zip
20-Sep-2016 10:21
MULTI DSM update on 128/2561
Only use with an updated MULTI module on DSM
(973.33 KiB) Downloaded 387 times
eepe.zip
04-Aug-2016 23:32
Fix baudrate on telemetry menu
(1.35 MiB) Downloaded 376 times
er9xProv821f.zip
03-Aug-2016 23:33
Add latest (FQ777) MULTI options
(388.53 KiB) Downloaded 386 times
er9x-128-2561p816.zip
12-July-2016 15:01
Add 16/8 channel option for PXX protocol
(172.21 KiB) Downloaded 238 times
eepe.zip
25-May-2016 11:47
Add "disable pre-read" option in settings
(1.35 MiB) Downloaded 240 times
er9xProv821e.zip
12-Apr-2016 14:27
Correct MULTI FrSky CH_16 and CH_8
(386.9 KiB) Downloaded 323 times
er9xProv821d.zip
07-Apr-2016 11:12
Add MULTI SFHSS and FrSky CH_16 and CH_8
(386.89 KiB) Downloaded 178 times
er9x-128P3a.zip
21-Mar-2016 18:36
2nd Attempt to fix P3 problem
(85.52 KiB) Downloaded 162 times
er9xProv821c.zip
16-Mar-2016 17:04
Add another MULTI protocol
(386.89 KiB) Downloaded 181 times
er9x-2561-128.zip
09-Feb-2016 16:39
Special versions with "Mavlink over FrSky" support. Needs specific Arduino translator.
Telemetry Menu bug fixed
(170.73 KiB) Downloaded 196 times
er9x-2561-128.zip
09-Feb-2016 12:21
Special versions with "Mavlink over FrSky" support. Needs specific Arduino translator.
(170.73 KiB) Downloaded 159 times
er9xProv821b.zip
26-Jan-2016 10:51
Further MULTI changes
Re-label Delay up and down
Add Q242 sub-protocol on MULTI
(383.13 KiB) Downloaded 190 times
er9xProv821a.zip
22-Jan-2016 16:19
Further MULTI changes
(383.05 KiB) Downloaded 160 times
er9xProv821.zip
11-Jan-2016 14:32
H8_3D MULTI supported
(382.71 KiB) Downloaded 211 times
amod_last.zip
23-Jan-2015 18:50
Fix the formatting of the .eepm file so it reads properly in eepe.
(26.36 KiB) Downloaded 264 times
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

petaca
Posts: 43
Joined: Tue Sep 17, 2013 6:37 pm
Country: -

Re: Er9x test versions

Post by petaca » Fri Apr 24, 2015 12:20 pm

Dear Mike

I have installed on my TX:

  er9x-R811
Version: V1.532-Mike
date 03.21.2014
mod: FRSKY - 128

I use EEPE program (version prior to 411).

My question is:

You may not copy EEPE in some pc setup menus of my radio?

For example, after copying all my models on the pc, I find the saved copy menu scales .... (SC1, SC2 ..... etc)

It is possible that the version of the program used EEPE not have ability to copy these menus from the radio tx to my pc?

I have thought that copying models from the pc to the transmitter radio, to review the SC1, SC2 menus, surprise !! .... Missing data SC1, SC2 etc ....

You believe that you need to update EEPE to solve this problem?

thank you very much

gabriel

User avatar
MikeB
9x Developer
Posts: 15717
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Er9x test versions

Post by MikeB » Fri Apr 24, 2015 1:17 pm

The latest eepe version is 412. You may downloadit from here: https://code.google.com/p/eepe/source/b ... nstall.zip.

The definitely works reading the Scalers from the radio, I just tested it.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Daedalus66
Posts: 1776
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Er9x test versions

Post by Daedalus66 » Fri Apr 24, 2015 2:10 pm

Just a reminder from Post #1:
"This is NOT intended as a thread for discussions, just as somewhere I can put test versions of er9x for people to try out."

User avatar
QuarX
Posts: 7
Joined: Mon Feb 03, 2014 4:44 am
Country: Spain
Location: Granada

Re: Er9x test versions

Post by QuarX » Sat May 09, 2015 11:29 pm

Dear Mike
Thank you very much for your great work!!, very appreciated here.
I have installed on my TX:

Version: V1.285-Mike
SVN: er9x-r818
date 04.27.2015
mod: FRSKY - 128

I have made the telemetry mod and it work well, but with this firmware version the THR and AIL switches are not working.
Any way to activate the switch mod in this version?
EDITED:
SORRY!! i can see now the option telemetry mod don in the "general configuration"
Works like a charm!
Thank you very much for this state of the art piece of software.
Best Regards
Jose A.
It´s your fault HAHAHA...


andrenoites
Posts: 11
Joined: Sun Jul 10, 2016 11:15 am
Country: -

Re: Er9x test versions

Post by andrenoites » Sun Jul 10, 2016 11:24 am

Hello Mike

I am testing you latest er9xProv821e firmware in my 9xr with a XJT module and it's working really good:

er9xProv821e.zip
12-Apr-2016 14:27
Correct MULTI FrSky CH_16 and CH_8
(386.9 KiB) Downloaded 111 times

The only thing I can't configure is the number of channels in the PXX D16 protocol, this is a really important feature because in a Taranis we can change from 16CH to 8CH and the frame size is reduced from 18ms to only 9ms.

In the disclaimer of your latest test version it shows "Correct MULTI FrSky CH_16 and CH_8"
Is this the same feature I am talking about? if not could it be possible to add this feature?

Thank you for your awesome work, I really enjoy flying with your firmware :)

zipray
Posts: 24
Joined: Sun Sep 04, 2016 9:05 am
Country: -

Re: Er9x test versions

Post by zipray » Sun Sep 04, 2016 12:16 pm

Hello Mike

Magic Mike, salute to you.
I have installed on my 9xr with a Multiprotocol-TX-Moduleand.it's working really good in Serial mode.

Version: V1.542-Mike
SVN: er9x-r820
date 04.27.2015
mod: FRSKY - NT

I want to know, can I use the futaba simulator interface to connect the bluetooth module receiving telemetry data using a mobile phone or computer?

User avatar
MikeB
9x Developer
Posts: 15717
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Er9x test versions

Post by MikeB » Sun Sep 04, 2016 3:44 pm

As mentioned in the first post "This is NOT intended as a thread for discussions, just as somewhere I can put test versions of er9x for people to try out."
Please post your question in another thread that is more suitable.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

phil
Posts: 17
Joined: Thu Jan 14, 2016 7:03 am
Country: Germany
Location: München

Re: Er9x test versions

Post by phil » Fri Dec 01, 2017 6:58 pm

Hello Mike, I got a small problem again. I bought the very cheap transmitter Turnigy 9x with AFHDS2A protokol. I can not bind with the er9x software, r820. the default binding PPM and the stored "multi" file with AFHDS2A does not get any binding. Is that a big problem or should I get a 4in1 module. would ersky9x run in this station? Sincerely, Siegi

User avatar
MikeB
9x Developer
Posts: 15717
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Er9x test versions

Post by MikeB » Fri Dec 01, 2017 8:37 pm

Please try using PPM but change the POLARITY to NEG.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

phil
Posts: 17
Joined: Thu Jan 14, 2016 7:03 am
Country: Germany
Location: München

Re: Er9x test versions

Post by phil » Sat Dec 02, 2017 4:52 am

Thanks Mike, I've already tried all possible settings. the receiver does not matter, the flashing of the lamp is always the same, no twitch. I'm not an individual case, in the review has written one that after the installation of er9x no binding was possible, only with a multi-module. thanks, and best regards, Siegi

User avatar
MikeB
9x Developer
Posts: 15717
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: Er9x test versions

Post by MikeB » Sat Dec 02, 2017 10:43 am

Please go over to this thread:
viewtopic.php?f=5&t=10578&p=133564#p132741
where this Tx is discussed.
It was reported there that all worked when using PMM with NEG polarity.

Mike.
ersky9x/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

phil
Posts: 17
Joined: Thu Jan 14, 2016 7:03 am
Country: Germany
Location: München

Re: Er9x test versions

Post by phil » Sat Dec 02, 2017 1:20 pm

Hello Mike, thank you very much for the info. I have been able to bind only one receiver in the delivery condition. the second he accepted but without function. I then had to tie the first receiver again. Now with er9x-d I have been able to bind the original with many different binding methods. I was also able to tie the 2nd FS IA6B, but the servos did not work. I could not tie a 3-passenger TGY IA6. I suspect that the transmitter module AFHDS2A has a binding weakness. warm regards Siegi

phil
Posts: 17
Joined: Thu Jan 14, 2016 7:03 am
Country: Germany
Location: München

Re: Er9x test versions

Post by phil » Sun Feb 04, 2018 5:09 pm

hello, in my Turnigy 9x I have installed er9x, version 820th now I would like to load the test version 820 and have problems. PC, Programmer is equally the driver. With the software load command, the eepe program starts correctly and one thinks it is completely compromised. After a short while the eepe stops and the info follows: Loading not possible. I have a riddle, have tried many things like other drivers, other programmers, but the final loading was not possible. What I do not understand, I could load the standard software. Thank you

Daedalus66
Posts: 1776
Joined: Tue Dec 27, 2011 8:22 pm
Country: -
Location: Ottawa

Re: Er9x test versions

Post by Daedalus66 » Sun Feb 04, 2018 8:33 pm

Phil
Mike has asked you repeatedly NOT to use this thread for discussion.



Sent from my iPhone using Tapatalk

Post Reply

Return to “er9x”