How do I setup FrSky XJT with 9XR Pro Running OpenTx?
How do I setup FrSky XJT with 9XR Pro Running OpenTx?
I have a XJT bound to a XSR with my 9XR Pro...no issues binding.
With my old TX/RX combo (Orange LRS), when the radio TX was on and lost signal with the RX, the TX module would give a warning tone...same when the RX/TX were about to go out of range of each other.
How do I setup the 9XR Pro and XJT combo to give the same audible feedback when the RX is getting to far out of TX range?
Thanks in advance folks!
With my old TX/RX combo (Orange LRS), when the radio TX was on and lost signal with the RX, the TX module would give a warning tone...same when the RX/TX were about to go out of range of each other.
How do I setup the 9XR Pro and XJT combo to give the same audible feedback when the RX is getting to far out of TX range?
Thanks in advance folks!
- MikeB
- 9x Developer
- Posts: 17995
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
You should get a voice warning from openTx when the RSSI values drops low.
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
What about when the RX is completely un-powered or out of range...and...is the extent of the signal strenght warnings voice, or can I have the radio beep as well like with the "Orange LRS"?MikeB wrote:You should get a voice warning from openTx when the RSSI values drops low.
Mike.
Thanks Mike!
Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
You would get one "telemetry lost" warning when going out of range/unpowered before further warnings are suppressed.
Beeps/voice can be set any way you like using logical switches and special functions.
Beeps/voice can be set any way you like using logical switches and special functions.
Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
Is there a decent write-up or video on how to set voice triggers on the 9XR Pro running OpenTX?
I want to trigger a voice file on low battery and RSSI from FrSky Telemetry.
I watched João video here: https://www.youtube.com/watch?v=6WRosEf ... qcuIqJXhb9 , But the options he describes are not available to me on the 9XR Pro with OpenTx?!
I want to trigger a voice file on low battery and RSSI from FrSky Telemetry.
I watched João video here: https://www.youtube.com/watch?v=6WRosEf ... qcuIqJXhb9 , But the options he describes are not available to me on the 9XR Pro with OpenTx?!
Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
Set up a logcial switch with your condition, then use that to trigger a "play track" special function.
Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
Ah ha...that's what I was looking for!Kilrah wrote:Set up a logcial switch with your condition, then use that to trigger a "play track" special function.
Now what should the "FUNC" Setting be in "Logical Switches"? Is there a list of the meanings of the different options?
Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
pyr8 wrote:Ah ha...that's what I was looking for!Kilrah wrote:Set up a logcial switch with your condition, then use that to trigger a "play track" special function.
Now what should the "FUNC" Setting be in "Logical Switches"? Is there a list of the meanings of the different options?
Found my answer here: http://open-txu.org/home/continuing-edu ... functions/
-
- Posts: 27
- Joined: Sat Jul 02, 2016 10:44 am
- Country: -
Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
what version of opentx are you using to get telemetry with xjt? as far as i knew it only worked with er9x.
Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
Whatever the latest release is!Geofrancis wrote:what version of opentx are you using to get telemetry with xjt? as far as i knew it only worked with er9x.
Re: How do I setup FrSky XJT with 9XR Pro Running OpenTx?
OpenTX 2.1.8 (2016-04-14)