OpenLRS moule (futaba)

Post Reply
stewwy
Posts: 36
Joined: Fri Oct 02, 2015 11:44 pm
Country: United Kingdom

OpenLRS moule (futaba)

Post by stewwy »

Maybe a silly question but I've a 100mW futaba openLRS 433Mhz Module, anybody know whats involved in fitting it to my 9x with 9Xtreme?
is it voltage compatable? I can reflash it with code for a 9x for the correct output (probably ;-) )

Grantman
Posts: 9
Joined: Thu Oct 29, 2015 6:31 am
Country: -

Re: OpenLRS moule (futaba)

Post by Grantman »

I believe the only thing you need is this: http://www.flytron.com/openlrs/123-futa ... apter.html
chubb
Posts: 17
Joined: Fri Jul 17, 2015 2:34 pm
Country: -

Re: OpenLRS moule (futaba)

Post by chubb »

Just solder on some servo leads for ppm, voltage in, and ground

Sent from my LG-H811 using Tapatalk
chubb
Posts: 17
Joined: Fri Jul 17, 2015 2:34 pm
Country: -

Re: OpenLRS moule (futaba)

Post by chubb »

And the RX pin if you want telemetry


Sent from my iPad using Tapatalk

Post Reply

Return to “9Xtreme upgrade board”