Hi Mike,
Not able to find in eepSkye (Rev.: 419 Jan 8, 2016) / Simulate (simulator) the THR switch.
Note: this is with my 9Xtreme radio (VERS: V.4032-Mike, DATE: 12.02.2016, SVN: ersky9x-pr219) with all switches
upgraded to 3 position switches except the TRN switch. Also has the Haptic Upgrade done also.
I had also flashed firmware VERS: V.4031-Mike, DATE: 08.01.2016, SVN: ersky9x-pr218 and same thing happening.
![No THR SW eepSkye 9Xtreme.jpg (165.77 KiB) Viewed 11948 times eepSkye NO THR SW with 9Xtreme 3 pos SW](./download/file.php?id=13412&t=1&sid=5849ef1a82fcaea52bde7260d213c4b6)
- eepSkye NO THR SW with 9Xtreme 3 pos SW
When the Simulator window opens (first time) the switches to the right are hidden until the Simulator Window is stretched to the right.
Also the AIL switch was located on the left side before as it should be, is now on the right side.
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).