Hi,
I know that Frsky don't make an X series hack module, there's no XHT. However I wondered whether anyone had taken an XJT to bits and used it in that way. I'd be interested in how it worked out.
Frsky X Series "Hack" module
Frsky X Series "Hack" module
----------------------------
Tony S
Tony S
-
- Posts: 28
- Joined: Thu Oct 22, 2015 8:40 pm
- Country: New Zealand
Re: Frsky X Series "Hack" module
It should work if it will fit. The pins inside the module bay are accessible from the internal pads. Don't know why anyone would do that unless fitting a 9Xtreme board to handle the telemetry side of things.
But then once a 9Xtreme board is installed the XJT works like a dream direct from the external module bay it is designed for.
But then once a 9Xtreme board is installed the XJT works like a dream direct from the external module bay it is designed for.
Re: Frsky X Series "Hack" module
Because someone might want frsky as their main system and use also other protocols externally. Like for example a DSM/DSMX module for BNF stuff, or even the DIY multiprotocol module for controlling lots of models.
That is what I'm doing with my 9x with Ar9x board at the moment.. it could be easily done with the 9xtreme as well.
João
That is what I'm doing with my 9x with Ar9x board at the moment.. it could be easily done with the 9xtreme as well.
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Frsky X Series
That's my reason, I use Frsky for aircraft, then I have a DSM module and a Flysky one for indoor/parkfly models (where full range an proper antenna isn't needed). I like to minimise module plugging, so prefer my main system to be hard-wired.jhsa wrote:Because someone might want frsky as their main system and use also other protocols externally.
----------------------------
Tony S
Tony S
- bob195558
- Posts: 2377
- Joined: Sun Dec 16, 2012 7:24 pm
- Country: United States
- Location: New England, Vermont
- Contact:
Re: Frsky X Series "Hack" module
Also you could use two D-Series module (internal and external) to be able to use two D-Series receivers to have 16 channels if needed.
Here shows two XJT modules in a 9Xtreme radio: (viewtopic.php?f=126&t=8226).
Bob B.
Here shows two XJT modules in a 9Xtreme radio: (viewtopic.php?f=126&t=8226).
Bob B.
Er9x on 9x radio, with Smartieparts Programmer and TelemetrEZ Board.
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).
ErSky9x on Taranis, Sky9x, 9Xtreme radios.
3D-Printing: (https://openrcforums.com/forum/viewforum.php?f=129).