I am following the example from the manual noted above on page 64, "Example 2 - Play a Source Value (Telemetry) after a Voice File" and it just won't do it
![Smile :)](./images/smilies/icon_e_smile.gif)
I have this exact setting from page 64 of the Er9x Manual labeled 2015:
Example 2 – Play a Source Value (Telemetry) after a Voice File
Here, when the switch “TRN” is turned ON, the source value “A1=” will be played once (Rate is set
to “ON”), AFTER the Voice file number 0040 (Pack Voltage). If the voltage on A1= is for example
11.5V, the Tx will say: “Pack Voltage, Eleven Point Five Volts”
Experiment with different settings and values to understand what every option does.
What I have noticed:
I have Ersky9x r218 (not simply Er9x) and my Voice List does not have a voice file number 0040 as in the example above but I do have the voice pack "Voice Pack for Ersky9x r218 and above.zip" loaded which includes equivalent files. Just not named the same as the manual for vanilla Er9x.
Seems like I either need the Er9x voice files loaded as well as the Ersky9x or I need to rename some of the Ersky9x voice files to what the Voice Alarm menu expects for spoken values...
Any hints or help would be appreciated.
Thanks,
-Duncan