timer question

Programing help and example for all firmwares based on thus's th9 firmware.
Post Reply
Geni0815
Posts: 8
Joined: Thu Dec 29, 2011 8:33 am
Country: -

timer question

Post by Geni0815 »

where in the control is defined in the photograph the marked timer is controlled by Menu button is?
Timmer2.jpg
Timmer2.jpg (89.12 KiB) Viewed 6819 times
Can I start the timer by the throttle stick as if it exceeds -90?
If so, how?

Geni

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: timer question

Post by MikeB »

Model setup, go down to T2thtrig, set it to ON. This is T(imer)2th(rottle)trig(ger).

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
Geni0815
Posts: 8
Joined: Thu Dec 29, 2011 8:33 am
Country: -

Re: timer question

Post by Geni0815 »

Now starts the timer as required but not stop. Where can I set the timer stops by throttle at 0 and only continues to run again when the throttle goes on.
A linear stopwatch for the motor period.

Geni
User avatar
cre8tiveleo
Posts: 1434
Joined: Tue Dec 27, 2011 6:13 pm
Country: -
Location: Ontario,(GTA North)
Contact:

Re: timer question

Post by cre8tiveleo »

The second timer does that.*the one under the model name on the right* (ths is the trigger I use to stay on with throttle, or off when throttle is off)
The main timer times total flight from throttle up.*the one on the bottom middle) (at least on mine that's the way I like it)
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: timer question

Post by MikeB »

Funny how things work out, Leo's "main timer" is actually timer 2, I've always thought of the other timer (timer 1) as the main timer.
The timer in the middle at the bottom is the second timer implemented, so is called timer 2. It was added to all for total flight time to be monitored.
The original timer (timer 1) at the right has many more trigger options, including a variable seed option that depends on the throttle position, so can be set to run at full speed at full throttle, and stop at zero throttle.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

User avatar
cre8tiveleo
Posts: 1434
Joined: Tue Dec 27, 2011 6:13 pm
Country: -
Location: Ontario,(GTA North)
Contact:

Re: timer question

Post by cre8tiveleo »

I'm right in my own mind. :D
User avatar
wheelspinner20
Posts: 175
Joined: Tue Dec 27, 2011 6:22 pm
Country: -
Location: Michigan, U.S.

Re: timer question

Post by wheelspinner20 »

Well timer 2 is the one I never use.!

Heck I didnt even know it was on there till I took some pics the other day... I'm wondering if Geni knows that you can even toggle it to the timer 1 page????
no more quippy little latin phrases.! Its old
heliphil
Posts: 45
Joined: Thu Apr 26, 2012 2:35 pm
Country: -

Re: timer question

Post by heliphil »

how do you reset the timer ???
User avatar
cre8tiveleo
Posts: 1434
Joined: Tue Dec 27, 2011 6:13 pm
Country: -
Location: Ontario,(GTA North)
Contact:

timer question

Post by cre8tiveleo »

Press and hold exit
heliphil
Posts: 45
Joined: Thu Apr 26, 2012 2:35 pm
Country: -

Re: timer question

Post by heliphil »

Thanks - another question - can I get the trainer switch to toggle the timer on and off ???
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: timer question

Post by MikeB »

In er9x, Timer1 may be triggered that way, select TRNm as the trigger.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!

Post Reply

Return to “er9x / gruvin9x / th9 based firmwares”