9XTREME W/Freerider or Liftoff

jimkill
Posts: 8
Joined: Mon Nov 09, 2015 10:57 pm
Country: -

9XTREME W/Freerider or Liftoff

Post by jimkill »

I'm trying to get my 9Xtreme to connect to my mac with a USB cable so that I can train with Freerider or the new Liftoff game. Before I modded the 9x it would connect just fine with a cable to freerider but I wasn't able to get it to trim enough to be able to fly. I connect it the same way with the new 9xtreme board and I don't get anything. I'm new to er sky 9x and I don't really know what I'm doing.

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XTREME W/Freerider or Liftoff

Post by MikeB »

What cable did you use before with the standard 9X? I'm not familiar with either the MAC or freerider.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
jimkill
Posts: 8
Joined: Mon Nov 09, 2015 10:57 pm
Country: -

Re: 9XTREME W/Freerider or Liftoff

Post by jimkill »

This is the cable, I'm not using any of the adapters in the picture just the usb cable.
Image
http://www.amazon.com/gp/product/B00DR4I4O0
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XTREME W/Freerider or Liftoff

Post by MikeB »

It's possible that USB adapter requires NEG polarity on the PPM signal rather than POS polarity.
On er9x, the trainer polarity is the same as the 'normal' PPM signal, you may have set this to NEG.
On ersky9x on the 9Xtreme, the trainer PPM signal is completely separate, and it looks like I've missed being able to set the polarity, so it is 'stuck' at POS.

I'll have a look at being able to configure this tomorrow.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
jimkill
Posts: 8
Joined: Mon Nov 09, 2015 10:57 pm
Country: -

Re: 9XTREME W/Freerider or Liftoff

Post by jimkill »

Great! Thanks Mike. I had tried the negative polarity, good to know that it doesn't do anything when you switch it in the menu.

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XTREME W/Freerider or Liftoff

Post by MikeB »

I've just posted a test version for the 9Xtreme here: viewtopic.php?f=7&t=4676#p65894.

This adds an option on the protocol menu for the trainer polarity, which does change the trainer output.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
drkavnger99
Posts: 14
Joined: Tue Oct 27, 2015 7:28 pm
Country: -

Re: 9XTREME W/Freerider or Liftoff

Post by drkavnger99 »

Was wondering why I couldn't get it to work after upgrading the board. I wish I could just plug in the USB into the 9xtreme and do away with all the audio jack mumbojumbo.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XTREME W/Freerider or Liftoff

Post by MikeB »

I appreciate that, I just need enough time to do everything!

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
drkavnger99
Posts: 14
Joined: Tue Oct 27, 2015 7:28 pm
Country: -

Re: 9XTREME W/Freerider or Liftoff

Post by drkavnger99 »

MikeB wrote:I appreciate that, I just need enough time to do everything!

Mike.
You're a robot right... No need to sleep, eat, or relax. /s

I think most if not all of us appreciate the time and patience you put into helping our impatient souls.
stewwy
Posts: 36
Joined: Fri Oct 02, 2015 11:44 pm
Country: United Kingdom

Re: 9XTREME W/Freerider or Liftoff

Post by stewwy »

Mike, does the test version for the trainer cable include the 3 position switch fix?

many thanks
jimkill
Posts: 8
Joined: Mon Nov 09, 2015 10:57 pm
Country: -

Re: 9XTREME W/Freerider or Liftoff

Post by jimkill »

Alright, I've downloaded it and flashed to my 9X, the polarity option for trainer is there now and I switched it to NEG. It works! I get a response from the calibration tool in both games. The problem now is that channels 1-4 are just jumping around with no input on the sticks. It's like someone is moving the sticks in all directions even though they are centered and not moving. Any idea what's going on now? They're not jumping around on the 9x menu screen, just the normal +- .2 fluctuation.
User avatar
Kilrah
Posts: 11108
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: 9XTREME W/Freerider or Liftoff

Post by Kilrah »

Try to reduce the number of channels put out by the radio to 6 instead of 8, some of these Chinese cables are buggy and behave better that way.
jimkill
Posts: 8
Joined: Mon Nov 09, 2015 10:57 pm
Country: -

Re: 9XTREME W/Freerider or Liftoff

Post by jimkill »

I just tried to reduce the channels and it doesn't seem to do anything, even if I drop it to 4.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XTREME W/Freerider or Liftoff

Post by MikeB »

stewwy: Yes, all 8 EXT signals should work correctly.

jimkill: I have a idea that some of these cables might need a wider pulse than 300uS. Again, at this point the trainer PPM is fixed at 300uS. Can you recall if on er9x you had set this differently for the cable?

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
jimkill
Posts: 8
Joined: Mon Nov 09, 2015 10:57 pm
Country: -

Re: 9XTREME W/Freerider or Liftoff

Post by jimkill »

I never changed the settings before so I don't know what they were. I simply plugged it in and it worked. Has anyone gotten the 9xtreme to work with one of these programs? If so what cable are you using? I'd be more than willing to buy a better cable if I knew it was going to work.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XTREME W/Freerider or Liftoff

Post by MikeB »

One slight difference between er9x on a 9X and the 9Xtreme is the signal level on er9x is 0-5V, while the 9Xtreme is 0-3.3V, due to the processors running from different voltages.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XTREME W/Freerider or Liftoff

Post by MikeB »

Because the 9Xtreme uses the same processor core as the Taranis, I've been able to port the USB joystick driver from openTx into ersky9x for the 9Xtreme.
I've just tested it with the FMS simulator.
This will be in the next test version I post.
Before anyone asks, the SKY board, 9XR-PRO and AR9X boards use a different processor. To get the USB joystick working on these requires a USB HID driver to be sorted out, which will take quite a bit of time.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9XTREME W/Freerider or Liftoff

Post by jhsa »

MikeB wrote:Because the 9Xtreme uses the same processor core as the Taranis, I've been able to port the USB joystick driver from openTx into ersky9x for the 9Xtreme.
I've just tested it with the FMS simulator.
This will be in the next test version I post.
Thank You..
Before anyone asks, the SKY board, 9XR-PRO and AR9X boards use a different processor. To get the USB joystick working on these requires a USB HID driver to be sorted out, which will take quite a bit of time.

Mike.
And Thank You..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
jimkill
Posts: 8
Joined: Mon Nov 09, 2015 10:57 pm
Country: -

Re: 9XTREME W/Freerider or Liftoff

Post by jimkill »

Mike, you are amazing. Thanks for all your hard work on this! I will anxiously await the new version.
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XTREME W/Freerider or Liftoff

Post by MikeB »

I managed to post it late last night!
It wasn't too difficult as I only had to copy the files from openTx and do a bit of merging.
I'll hopefully add this to ersky9x for the Taranis as it is the same processor.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9XTREME W/Freerider or Liftoff

Post by jhsa »

I didn't see it, fell asleep..
Thank you Mike.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9XTREME W/Freerider or Liftoff

Post by jhsa »

There is one little problem.. when using the simulator the battery bay must be open and the battery fall down :(
I really wouldn't like to cut the battery cover :(
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9XTREME W/Freerider or Liftoff

Post by jhsa »

Tested.. And working very good. Thank You..
But it's called Taranis?? :mrgreen: :mrgreen:
Also when just connecting the radio to see the SD Card contents. :)
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
jhsa
Posts: 19480
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: 9XTREME W/Freerider or Liftoff

Post by jhsa »

To use the joystick feature, turn your radio ON as you do normally, and then connect the USB cable. The first time you do this a driver will be installed on your computer.
Just follow the same procedure to use your radio with a simulator or another game..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XTREME W/Freerider or Liftoff

Post by MikeB »

I've sorted the name to be "9Xtreme joystick" for the next version.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
stewwy
Posts: 36
Joined: Fri Oct 02, 2015 11:44 pm
Country: United Kingdom

Re: 9XTREME W/Freerider or Liftoff

Post by stewwy »

Joystick works well in PheonixRC :D
User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: 9XTREME W/Freerider or Liftoff

Post by MikeB »

Slightly off topic, but the joystick is also working on ersky9x for the Taranis.

Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
drkavnger99
Posts: 14
Joined: Tue Oct 27, 2015 7:28 pm
Country: -

Re: 9XTREME W/Freerider or Liftoff

Post by drkavnger99 »

Mike

You rule man. I really mean it! You ROCK!. Never have I seen a product so well supported from the time of release (well I'm a Systems Admin so go figure :lol: )

Thank you for all your hard work. We are enjoying the fruits of your labor.
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: 9XTREME W/Freerider or Liftoff

Post by OctavioS »

Has anybody tryed to configure 9xtreme for freerider. I followed the taranis config sheet but to no avail.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: 9XTREME W/Freerider or Liftoff

Post by OctavioS »

I managed to configure 9Xtreme for FPVFreerider:
fpv free.png
fpv free.png (100.29 KiB) Viewed 16058 times
Its very simple actually and it doesnt require all the settings from the Taranis for instance.
First, create a model and name it whatever you want;
DSCF1468.JPG
Second,go to protocol, in the model menu and switch off the external (i think it really doesnt matter if you dont have a module in the module bay);
DSCF1481.JPG
Third, go to the curves menu and make a linear curve from -100 to 100; Skip this step, its not needed with this configuration.
DSCF1483.JPG
Fourth, go to the mixer menu and edit all sources to 50 weight and 50 offset and add curve 1;
DSCF1475.JPG
DSCF1478.JPG
DSCF1473.JPG
Dont add DR/expo, leave them as the default values shows.
Now, plug the radio via usb to pc, start FPVFreerider and follow the instructions to calibrate the tx.
The circle that shows the stick position has to be centered.
It worked fine for me. Enjoy
Last edited by OctavioS on Sat Nov 21, 2015 10:15 pm, edited 3 times in total.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.

Post Reply

Return to “9Xtreme upgrade board”