Arduino Due add on to 9X
Re: Arduino Due add on to 9X
looks promissing.
Btw, im working both my 9x's with taranis batteries (so, 2000mha 7.2v(~8.4v charged)), im wondering if this new more advanced board will work with the same batteries?
Btw, im working both my 9x's with taranis batteries (so, 2000mha 7.2v(~8.4v charged)), im wondering if this new more advanced board will work with the same batteries?
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
Arduino Due add on to 9X
This looks very interesting. I am on board.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
Custom 9x with M64/Telemetry Mod
- MikeB
- 9x Developer
- Posts: 17993
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Arduino Due add on to 9X
Should work with no problems on 7.2V
Mike.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Arduino Due add on to 9X
Yes, it will. Anything from 4xAA to a fully charged 3S should be fine. I think a fully charged 4S would be the limit, but I see no reason to go there!OctavioS wrote:looks promissing.
Btw, im working both my 9x's with taranis batteries (so, 2000mha 7.2v(~8.4v charged)), im wondering if this new more advanced board will work with the same batteries?
Re: Arduino Due add on to 9X
Ok, thx!
Enviado do meu D6633 através de Tapatalk
Enviado do meu D6633 através de Tapatalk
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.
Re: Arduino Due add on to 9X
I know this is an older thread but it seemed to be abandoned just about the time that Smartie Parts did their pre-announcement. Has Brent taken this any farther? I know he was working on this for more than just add on for 9x transmitters. I think this project was groundbreaking and I hate to see it fade off.
cheers
strongeye
cheers
strongeye
Re: Arduino Due add on to 9X
Resurrecting an old thread here. Did this project with the Sky9x_core ever take off? I found it compelling.
Thanks.
Strongeye
Thanks.
Strongeye
Re: Arduino Due add on to 9X
I have been working on a different style of board.
This uses the same connections of the 9x.
Except it has 0.10" connections for the LCD and Menu keys
-Brent
This uses the same connections of the 9x.
Except it has 0.10" connections for the LCD and Menu keys
-Brent
Re: Arduino Due add on to 9X
I thought you gave up
João
João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
Re: Arduino Due add on to 9X
The other Core design I was working on , needed to many things to be added to use as a stand alone board.
This way it makes it easier for DIY'ers to connect and test their boards..the JST style wire harnesses are available on ebay for cheap..
-Brent
This way it makes it easier for DIY'ers to connect and test their boards..the JST style wire harnesses are available on ebay for cheap..
-Brent
- Attachments
-
- coretx-9x_v1_1.pdf
- (76.81 KiB) Downloaded 583 times
Last edited by SkyNorth on Tue Nov 24, 2015 10:17 pm, edited 1 time in total.
-
- Posts: 143
- Joined: Wed May 16, 2012 11:41 pm
- Country: United States
- Location: SF Bay Area, CA
Re: Arduino Due add on to 9X
What's the dimension of the board?
Re: Arduino Due add on to 9X
The board is 93mm x 50mm
Re: Arduino Due add on to 9X
Thank you very much. This is fantastic.SkyNorth wrote:The other Core design I was working on , needed to many things to be added to use as a stand alone board.
This way it makes it easier for DIY'ers to connect and test their boards..the JST style wire harnesses are available on ebay for cheap..
Here is what the Schematic looks like. Once the Design is tested ...
I will make the PCB Gerber files available so people can
make their own boards...So the Design is open source.
-Brent
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9
Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW
-
- Posts: 143
- Joined: Wed May 16, 2012 11:41 pm
- Country: United States
- Location: SF Bay Area, CA
Re: Arduino Due add on to 9X
Perfect!SkyNorth wrote:The board is 93mm x 50mm