no cyclic controls

Hardware Support for the 9XR
Post Reply
turnAwrench
Posts: 3
Joined: Sun Oct 23, 2016 5:07 am
Country: -

no cyclic controls

Post by turnAwrench » Sun Oct 23, 2016 5:13 am

hello folks, new guy here.
just learned how to kinda mess with my 9XR and i was setting it up for my 1st FBL HELI. got pretty much everything working based on a video i saw online, using a tarot zyx-s for my FBL GYRO, everything checks out good except when i engaged my throttle hold everything goes dead with the motor. but once i remove THOLD all works as programed. i dont know what i messed up in the mixes/setup that is causing this. any chance i can get some suggestions/advice? thanks in advance!

Frank

User avatar
OctavioS
Posts: 578
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

octavios

Post by OctavioS » Thu Oct 27, 2016 10:10 pm

It's a good idea to download the eeprom and post it here.
3 x - 9X TX with 9xtreme board;
Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s.
Too much radios? Yes too much damn radios. No more please.

"Sometimes you just have to take a leap and build your wings on the way down."

turnAwrench
Posts: 3
Joined: Sun Oct 23, 2016 5:07 am
Country: -

Re: no cyclic controls

Post by turnAwrench » Fri Oct 28, 2016 5:55 pm

what do you mean by eeprom? cause i input all the mixes myself based on the video i saw. i haven't done anything outside of programming my radio besides of how it came from the factory. now if you mean jot down my settings i can do that...?

User avatar
OctavioS
Posts: 578
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: no cyclic controls

Post by OctavioS » Fri Oct 28, 2016 7:40 pm

Connect the radio to pc and save eprom or model to pc and post it here. Use eepe program or opentx companion.

Enviado do meu S60 através de Tapatalk
Last edited by OctavioS on Mon Oct 31, 2016 11:14 pm, edited 1 time in total.
3 x - 9X TX with 9xtreme board;
Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s.
Too much radios? Yes too much damn radios. No more please.

"Sometimes you just have to take a leap and build your wings on the way down."

User avatar
Kilrah
Posts: 9608
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: no cyclic controls

Post by Kilrah » Fri Oct 28, 2016 7:43 pm

If he's got a 9XR and never reflashed it he can't do that.


User avatar
OctavioS
Posts: 578
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: no cyclic controls

Post by OctavioS » Mon Oct 31, 2016 7:40 pm

That was my guess too.

Enviado do meu S60 através de Tapatalk
3 x - 9X TX with 9xtreme board;
Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s.
Too much radios? Yes too much damn radios. No more please.

"Sometimes you just have to take a leap and build your wings on the way down."

Post Reply

Return to “Turnigy 9XR radio”