RSSI on spare channel

Hardware Support for the 9XR
Post Reply
yaoweic
Posts: 10
Joined: Wed Mar 30, 2016 6:54 am
Country: United Kingdom

RSSI on spare channel

Post by yaoweic » Thu May 19, 2016 7:11 pm

Hi guys, I have a Turnigy9x running on OpenTX 2.0.19. I have a FrSky DIY DHT and D4R-ii receiver.
Ive seen videos setting up Taranis to have RSSI on a spare channel however I do not have RSSI as a source on a spare channel in the Turnigy9x?
I am actually interested to put RSSI on my Minimosd Micro, however it does not communicate well with D4R-ii, I read that it needs some form of converter/filter in between D4R-ii and Minimosd Micro's RSSI input. I was recommended to follow the same method as a Taranis, creating RSSI on a spare channel, then output it as RSSI from FC on MWOSD.

Any thoughts would be appreciated. :geek:

Thanks

yaoweic
Posts: 10
Joined: Wed Mar 30, 2016 6:54 am
Country: United Kingdom

Re: RSSI on spare channel

Post by yaoweic » Sun May 22, 2016 5:12 pm

Hi guys, any thoughts or did I post on the wrong forum?

User avatar
Kilrah
Posts: 9608
Joined: Sat Feb 18, 2012 6:56 pm
Country: Switzerland

Re: RSSI on spare channel

Post by Kilrah » Sun May 22, 2016 6:23 pm

This feature is not available in OpenTX for 9x.

yaoweic
Posts: 10
Joined: Wed Mar 30, 2016 6:54 am
Country: United Kingdom

Re: RSSI on spare channel

Post by yaoweic » Mon May 23, 2016 10:31 pm

Thanks for the response Kilrah. Anyone had experience putting RSSI on MinimOSD Micro when running a D4R-ii and using Turnigy9x with OpenTx?
Thanks

Post Reply

Return to “Turnigy 9XR radio”