I would use Fy-Dos + GPS and OSD hornet on a quadcoptere and Turnigy 9x, I must set a path with a 3 position switch (id0, id1, id2) to change the flight mode l.Can you give me the programing of this system?.
I thought
channel 6 100% Full inter ido stabilized mode
100% Full inter ID1 Hovering mode
100% Full inter ID2 auto return to launch mode
thank you for your help
Turnigy 9x and Fy-dos and hornet osd
Re: Turnigy 9x and Fy-dos and hornet osd
Hy
like this?
take 3 mixer lines at ch6
ch6 id0
R id1
R id2
ID0 brings -100% = 1000us
ID1 brings 0% = 1500us
ID2 brings +100%= 2000ms
what us do you need to change the 3 modes?
so you must take weight and offset to be under(ID0) on(ID1) over (ID2)
Helle
like this?
take 3 mixer lines at ch6
ch6 id0
R id1
R id2
ID0 brings -100% = 1000us
ID1 brings 0% = 1500us
ID2 brings +100%= 2000ms
what us do you need to change the 3 modes?
so you must take weight and offset to be under(ID0) on(ID1) over (ID2)
Helle
Re: Turnigy 9x and Fy-dos and hornet osd
On openTx:
ch6 3POS 100% --> -100, 0, +100
Reinhard
ch6 3POS 100% --> -100, 0, +100
Reinhard
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9x and Fy-dos and hornet osd
From r775 (Sep 2012) 3POS is an input on ER9X as well so:
ch6 3POS 100% --> -100, 0, +100
works on er9x.
Mike.
ch6 3POS 100% --> -100, 0, +100
works on er9x.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!
Re: Turnigy 9x and Fy-dos and hornet osd
I try this
Channel 6 -100% 3POS Inter IDO
+0% 3POS inter ID1
+100% 3POS in ter ID2
You have understand that I am a newbee
Thank all
Channel 6 -100% 3POS Inter IDO
+0% 3POS inter ID1
+100% 3POS in ter ID2
You have understand that I am a newbee
Thank all
- MikeB
- 9x Developer
- Posts: 17990
- Joined: Tue Dec 27, 2011 1:24 pm
- Country: -
- Location: Poole, Dorset, UK
Re: Turnigy 9x and Fy-dos and hornet osd
You just need:
ch6 +100% 3POS
no switches, it gives you the three outputs -100, 0 and +100 for the three positions of the 3 position switch.
Mike.
ch6 +100% 3POS
no switches, it gives you the three outputs -100, 0 and +100 for the three positions of the 3 position switch.
Mike.
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
The difficult we do immediately,
The impossible takes a little longer!