SOMETHING WENT WRONG!!!!!

Hardware Support for the 9XR
User avatar
jhsa
Posts: 19428
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: SOMETHING WENT WRONG!!!!!

Post by jhsa » Sat Jun 03, 2017 4:38 pm

I think all resistors marked 102 might be connected to the pins. Please check that.. if that is the case, yoiu might have to bypass them.
Leave the 103 alone..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW


blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sat Jun 03, 2017 4:46 pm

yeah mine looks a tad bit different than yours.....lol

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sat Jun 03, 2017 5:10 pm

Joao,
do you mean the output pins?

User avatar
jhsa
Posts: 19428
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: SOMETHING WENT WRONG!!!!!

Post by jhsa » Sun Jun 04, 2017 1:56 am

Yes. Measure if the resistors are connected to the programming pins. I bet they are.

Sent from my thor using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sun Jun 04, 2017 2:22 am

yes they are, is that not suppose to be like that?


User avatar
jhsa
Posts: 19428
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: SOMETHING WENT WRONG!!!!!

Post by jhsa » Sun Jun 04, 2017 2:47 am

Ok, then for sure their value is too high at 1000 ohms.
You will probably have to bypass those 3 resistors with the 102 marking. Or just wait for the other programmer to arrive ;)

João

Sent from my thor using Tapatalk

My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sun Jun 04, 2017 2:50 am

yeah,since i dont know how to bypass them how you want me to do it, i think i will wait for the new ones. taking my mind off this lil issue til they get in. i been busy re working the wire setup on my trex 600....i got bored....lol
needed to relax my mind from the radio issue.... but dont go too far you know i will be back real soon, my friend! hahah

ReSt
Posts: 1564
Joined: Tue Dec 27, 2011 11:34 pm
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by ReSt » Sun Jun 04, 2017 7:38 am

blkfleet wrote:
Sun Jun 04, 2017 2:50 am
yeah,since i dont know how to bypass them how you want me to do it,
Solder a single stranded wire from one end to the other end of each of the R4, R5, R7 resistors

or unsolder these resistors completely and solder a wire instead of each of the removed resistors from one solder pad to the other one.

Reinhard

but nevertheless, I would also once more check conductivity from the UABASP pins ( Miso, Mosi,...) to the respective solder pads on the radio when the USBASP is connected to the radio (Powered off !!)

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: RE: Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sun Jun 04, 2017 8:25 pm

ReSt wrote:
blkfleet wrote:
Sun Jun 04, 2017 2:50 am
yeah,since i dont know how to bypass them how you want me to do it,
Solder a single stranded wire from one end to the other end of each of the R4, R5, R7 resistors

or unsolder these resistors completely and solder a wire instead of each of the removed resistors from one solder pad to the other one.

Reinhard

but nevertheless, I would also once more check conductivity from the UABASP pins ( Miso, Mosi,...) to the respective solder pads on the radio when the USBASP is connected to the radio (Powered off !!)
I shall try this later on, wife has me doing chores.....ugh.....lol

Sent from my SM-G955U using Tapatalk


blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sat Jun 10, 2017 12:15 am

ok so i am back, got my new usbasp from HK, and from what i can tell i guess the previous USBASP was acting up.....but i still have no sound, no screen but now i can read the eeprom...... any ideas folks?

=================================================================================
Started AVRDUDE
C:/Program Files/eePe/avrdude.exe -c usbasp -p m128 -P usb -U flash:r:C:/Users/admin/Desktop/flashfirm/test01.bin:r
=================================================================================

avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude.exe: Device signature = 0x1e9702
avrdude.exe: reading flash memory:

Reading | ################################################## | 100% 70.78s

avrdude.exe: writing output file "C:/Users/admin/Desktop/flashfirm/test01.bin"

avrdude.exe done. Thank you.


=================================================================================
AVRDUDE done - SUCCESSFUL
=================================================================================

User avatar
jhsa
Posts: 19428
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: SOMETHING WENT WRONG!!!!!

Post by jhsa » Sat Jun 10, 2017 12:28 am

Go to eepe, "Burn Menu" and click on "Read Fuses". Please post the result here

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sat Jun 10, 2017 12:30 am

jhsa wrote:
Sun Jun 04, 2017 2:47 am
Ok, then for sure their value is too high at 1000 ohms.
You will probably have to bypass those 3 resistors with the 102 marking. Or just wait for the other programmer to arrive ;)

João

Sent from my thor using Tapatalk
Joao, you see the eeprom report, i got using the new USBASP?

User avatar
jhsa
Posts: 19428
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: SOMETHING WENT WRONG!!!!!

Post by jhsa » Sat Jun 10, 2017 12:31 am

jhsa wrote:
Sat Jun 10, 2017 12:28 am
Go to eepe, "Burn Menu" and click on "Read Fuses". Please post the result here

João
Yes, I saw it.. Please do what I'm asking.

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sat Jun 10, 2017 12:51 am

jhsa wrote:
Sat Jun 10, 2017 12:31 am
jhsa wrote:
Sat Jun 10, 2017 12:28 am
Go to eepe, "Burn Menu" and click on "Read Fuses". Please post the result here

João
Yes, I saw it.. Please do what I'm asking.

João
oh ok, sorry did not see your post.

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sat Jun 10, 2017 12:53 am

=================================================================================
Started AVRDUDE
C:/Program Files/eePe/avrdude.exe -c usbasp -p m128 -P usb -U lfuse:r:-:i -U hfuse:r:-:i -U efuse:r:-:i
=================================================================================

avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude.exe: Device signature = 0x1e9702
avrdude.exe: reading lfuse memory:

Reading | ################################################## | 100% 0.00s

avrdude.exe: writing output file "<stdout>"
avrdude.exe: reading hfuse memory:

Reading | ################################################## | 100% 0.00s

avrdude.exe: writing output file "<stdout>"
avrdude.exe: reading efuse memory:

Reading | ################################################## | 100% 0.00s

avrdude.exe: writing output file "<stdout>"

avrdude.exe done. Thank you.


=================================================================================
AVRDUDE done - SUCCESSFUL
=================================================================================
=================================================================================
FUSES: Low=0e High=c9 Ext=ff
=================================================================================

User avatar
jhsa
Posts: 19428
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: SOMETHING WENT WRONG!!!!!

Post by jhsa » Sat Jun 10, 2017 1:02 am

Ok, go to "Burn" menu, click on "Set Fuses to protect EEPROM" a warning will come up. Confirm..

After that, see if your radio works

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sat Jun 10, 2017 1:14 am

nope still doing the same thing. and this is what the print out said when i did what you told me to do.

=================================================================================
Started AVRDUDE
C:/Program Files/eePe/avrdude.exe -c usbasp -p m128 -P usb -u -U lfuse:w:0x0E:m -U hfuse:w:0x81:m -U efuse:w:0xFF:m
=================================================================================

avrdude.exe: warning: cannot set sck period. please check for usbasp firmware update.
avrdude.exe: AVR device initialized and ready to accept instructions

Reading | ################################################## | 100% 0.01s

avrdude.exe: Device signature = 0x1e9702
avrdude.exe: reading input file "0x0E"
avrdude.exe: writing lfuse (1 bytes):

Writing | ################################################## | 100% 0.00s

avrdude.exe: 1 bytes of lfuse written
avrdude.exe: verifying lfuse memory against 0x0E:
avrdude.exe: load data lfuse data from input file 0x0E:
avrdude.exe: input file 0x0E contains 1 bytes
avrdude.exe: reading on-chip lfuse data:

Reading | ################################################## | 100% 0.00s

avrdude.exe: verifying ...
avrdude.exe: 1 bytes of lfuse verified
avrdude.exe: reading input file "0x81"
avrdude.exe: writing hfuse (1 bytes):

Writing | ################################################## | 100% 0.01s

avrdude.exe: 1 bytes of hfuse written
avrdude.exe: verifying hfuse memory against 0x81:
avrdude.exe: load data hfuse data from input file 0x81:
avrdude.exe: input file 0x81 contains 1 bytes
avrdude.exe: reading on-chip hfuse data:

Reading | ################################################## | 100% 0.00s

avrdude.exe: verifying ...
avrdude.exe: 1 bytes of hfuse verified
avrdude.exe: reading input file "0xFF"
avrdude.exe: writing efuse (1 bytes):

Writing | ################################################## | 100% 0.00s

avrdude.exe: 1 bytes of efuse written
avrdude.exe: verifying efuse memory against 0xFF:
avrdude.exe: load data efuse data from input file 0xFF:
avrdude.exe: input file 0xFF contains 1 bytes
avrdude.exe: reading on-chip efuse data:

Reading | ################################################## | 100% 0.00s

avrdude.exe: verifying ...
avrdude.exe: 1 bytes of efuse verified

avrdude.exe done. Thank you.


=================================================================================
AVRDUDE done - SUCCESSFUL
=================================================================================

User avatar
jhsa
Posts: 19428
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: SOMETHING WENT WRONG!!!!!

Post by jhsa » Sat Jun 10, 2017 1:21 am

hmm, weird.. The high fuse seems to have been messed up. Now is OK..
try downloading the er9x firmware and flash it..

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sat Jun 10, 2017 1:25 am

ok be back in a few minutes

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sat Jun 10, 2017 1:34 am

YES! YES!
ITS WORKING AGAIN!!!!!!
So please oh mighty Joao....lol
can you please explain to me what happened or at least what you think happened?
and many many thanks!!!!!!!

User avatar
jhsa
Posts: 19428
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: SOMETHING WENT WRONG!!!!!

Post by jhsa » Sat Jun 10, 2017 1:52 am

Good, well done :)

I think your other programmer messed the fuses up, and also probably the firmware when installing it. Do not use it..
For your information, with the fuses programmed to protect the eeprom, your eeprom will not be erased anymore when flashing the firmware. your models, calibration and settings should be preserved.
It is a good idea though to keep a backup of your radio's eeprom on your computer..
To download the radio's eeprom, please start eepe, go to "Burn" menu, and click on "Read memory from TX". Your eeprom will be opened in eepe. Now go to "File", "Save As", give it a name, and save it with the file extension ".eepe"
Please don't break it again :mrgreen: I'm going to sleep now.. ;) :)

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

blkfleet
Posts: 87
Joined: Mon Nov 25, 2013 4:07 am
Country: -

Re: SOMETHING WENT WRONG!!!!!

Post by blkfleet » Sat Jun 10, 2017 1:54 am

your the best once again thanks!!!!
and enjoy your sleep my friend!


Post Reply

Return to “Turnigy 9XR radio”