Schematics for 9XR

Hardware Support for the 9XR
Post Reply
User avatar
Hasse.69
Posts: 141
Joined: Fri Dec 30, 2011 8:59 pm
Country: -
Location: Ostergotland Sweden

Schematics for 9XR

Post by Hasse.69 » Mon Jul 15, 2013 4:46 pm

I can´t find any schematics for the 9XR.
Anyone else know something?
And what kind of lcd will suit the motherboard?
Best regards , Hasse.
Last edited by Hasse.69 on Sun Jul 28, 2013 9:43 am, edited 1 time in total.
To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

SkyNorth
Posts: 958
Joined: Tue Dec 27, 2011 11:40 am
Country: -
Location: Mansfield , Ontario

Re: Schematics for 9XR

Post by SkyNorth » Mon Jul 15, 2013 5:13 pm

The LCD on the 9XR has a unique connection , the 9x LCD or the optrex LCD , have slightly different connections for
the LCD charge pump driver. , I do not know of any direct replacements...
I'll ask HK if they plan on selling them separate.

-Brent

User avatar
Hasse.69
Posts: 141
Joined: Fri Dec 30, 2011 8:59 pm
Country: -
Location: Ostergotland Sweden

Re: Schematics for 9XR

Post by Hasse.69 » Mon Jul 15, 2013 5:29 pm

Hi Brent!
i´ve seen some guys discussing it in the discussion thread below the product.
Jepp i threw myself into it toooooo :mrgreen:
To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
Hasse.69
Posts: 141
Joined: Fri Dec 30, 2011 8:59 pm
Country: -
Location: Ostergotland Sweden

Re: Schematics for 9XR

Post by Hasse.69 » Mon Jul 29, 2013 6:54 pm

Now i got an answer from Skyfox60.
He says that if you search ebay for:

(12864 128X64 Graphic ( COG ) LCD Module Display / LCM)
The sellers nick is egochina8848
It´s listed for 12.80$

Then you will find a LCD with the right properties but wrong size ,a tiny bit. :)
The wires for the backlight also needs to be swapped.
Any comments , thoughts , anyone , Brent :D
Best to all of you , Hasse.
To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

SkyNorth
Posts: 958
Joined: Tue Dec 27, 2011 11:40 am
Country: -
Location: Mansfield , Ontario

Re: Schematics for 9XR

Post by SkyNorth » Tue Jul 30, 2013 9:07 pm

Hi ,
You need a LCD that will work with this pinout
Lcd_wire.PDF
(37.65 KiB) Downloaded 602 times
Pin 1 location is not standard on all ribbon cables , also you need the contacts facing down.

-Brent


ReSt
Posts: 1472
Joined: Tue Dec 27, 2011 11:34 pm
Country: -

Re: Schematics for 9XR

Post by ReSt » Tue Jul 30, 2013 10:12 pm

If we could get a spare connector of that type, that is used on the Tgy9x board, shouldn't we be able to unsolder the 'wrong' connector and resolder the correct one? (similar to changing the CPU). And use the spare displays that are available for the Tgy9x.

But how is such a connector called and where to find?

Reinhard

SkyNorth
Posts: 958
Joined: Tue Dec 27, 2011 11:40 am
Country: -
Location: Mansfield , Ontario

Re: Schematics for 9XR

Post by SkyNorth » Tue Jul 30, 2013 10:48 pm

The stock 9x lcd will not work , the pin out is slightly different

User avatar
Hasse.69
Posts: 141
Joined: Fri Dec 30, 2011 8:59 pm
Country: -
Location: Ostergotland Sweden

Re: Schematics for 9XR

Post by Hasse.69 » Tue Oct 01, 2013 10:01 pm

To support the forum:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=82QKZZN5ZC8JE
To support ER9X:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

MxM33
Posts: 4
Joined: Tue Oct 08, 2013 1:18 pm
Country: -

Re: Schematics for 9XR

Post by MxM33 » Wed Oct 30, 2013 12:51 pm

Stock 9x lcd CAN be used with 9XR board. Connection is the same. BUT!!! you need move the connector one step to the right. it's not easy with 0.5mm pitch connector.
Image

all works
Image

User avatar
jhsa
Posts: 18013
Joined: Tue Dec 27, 2011 5:13 pm
Country: Germany

Re: Schematics for 9XR

Post by jhsa » Wed Oct 30, 2013 8:56 pm

How the hell you guys find these things out? :o ;) Well done.. Is that a schematic from the 9XR on the table?

João
My er9x/Ersky9x/eepskye Video Tutorials
https://www.youtube.com/playlist?list=PL5uJhoD7sAKidZmkhMpYpp_qcuIqJXhb9

Donate to Er9x/Ersky9x:
https://www.paypal.com/cgi-bin/webscr?cmd=_s-xclick&hosted_button_id=YHX43JR3J7XGW

User avatar
bob195558
Posts: 1891
Joined: Sun Dec 16, 2012 7:24 pm
Country: United States
Location: New England, Vermont
Contact:

Re: Schematics for 9XR

Post by bob195558 » Fri Jun 02, 2017 12:39 am

More info here: (viewtopic.php?f=99&t=10231&p=128945#p128945)
and (viewtopic.php?f=95&t=10237).

9xr_06_1_Schematics.zip
Down-Load and un-zip: 9XR Schematics_06_1.pdf
(50.89 KiB) Downloaded 132 times

9XR Schematics_9.jpg
9XR Schematics_06_1

Bob B.
ErSky9x on Taranis, Sky9x, 9Xtreme, Er9x on 9x with Smartieparts Programmer with TelemetrEZ Board
3D Printing: (http://openrcforums.com/forum/viewforum.php?f=85)

jaeno
Posts: 7
Joined: Sun Oct 02, 2016 10:47 am
Country: Slovakia

Re: Schematics for 9XR

Post by jaeno » Sun Nov 12, 2017 3:14 pm

MxM33 wrote:
Wed Oct 30, 2013 12:51 pm
Stock 9x lcd CAN be used with 9XR board. Connection is the same. BUT!!! you need move the connector one step to the right. it's not easy with 0.5mm pitch connector.
Image

all works
Image
It looks easier to me just cut 0.5mm from the flat cable (as the last pin is not used) and just shift the flat cable rather than moving the connector...

Post Reply

Return to “Turnigy 9XR radio”