Jumper T16 Open Source Multi-protocol Radio Transmitter JumperTX
Basic Specifications:
Size: 180*190*58
Weight: 798g (with 2 x 18650 batteries installed)
Voltage: DC7-8.4V
Battery: 2 x 18650 (tray supplied) or 2S lipo (batteries not included)
Current: 350mah (NO CRSF)
Channel: 16ch
Features:
- STM32F429BIT6 MCU
- Industrial grade 4.3 inch 480*272 outdoor readable color screen
- Compatible with JumperTX (An independent fork of OpenTX)
- Wheel menu button
- Angle adjustable ultra-smooth dual bearing gimbals
- Multi-protocol transmitter module with TBS CRSF support
- Removable battery
- Supports Telemetry
- Memory 16M (can be expanded by TF card)
- Voice function
- Vibration reminder function
- Standard JR module slot
- 6-Flight Mode Buttons (for APM and Pixhawk flight controllers)
- Two-color LED status display
Working voltage: 6-9v
Working current: <=100ma
Operating frequency: 2.4G ISM band
RF power: +22DBM
Main control chip: STM32F103CBT6 (128K ROM, 20K RAM)
Module bay compatibility: FRSky, Jr and other dimensions: 64*49*33 (without antenna)
Net Weight: 42g (including antenna)
Software Compatibility: Suitable for radios using OpenTX or er9x/ersky9x
Firmware updatable: Yes, via USB.
RF Chip Data
Cypress Semiconductor CYRF6936: DSM/DSMX, Walkera Devo
Texas Instruments CC2500: FrSky, Futaba SFHSS
Amiccom A7105: FlySky, FlySky AFHDS2A, Hubsan
Nordic Semiconductor NRF24L01: HiSky, Syma, ASSAN and most other Chinese models
Product Info
https://www.jumper.xyz/t16
GitHub
https://github.com/JumperXYZ
NOTE: JumperTX is a fork from the original OpenTX Project. JumperTX is independently maintained and distributed by Jumper Technology. JumperTX is not affiliated with or supported by the OpenTX project.