KDS receiver K-8X binding to TX16S radio

Help and support for any other brand radios
Post Reply
ccaveman
Posts: 1
Joined: Thu Mar 25, 2021 7:43 am
Country: -

KDS receiver K-8X binding to TX16S radio

Post by ccaveman » Thu Mar 25, 2021 8:07 am

Hello,

I have purchased a Radiomaster TX16S with OpenTX, because it is multi-protocol.
Unfortunately I am not able bind my KDS K-8X receiver of my helicopter. It's hard to find which protocol exactly is used by the K-8X.

I've tried all DSM and DSMX options, for that's the most logical option, but no luck there..

Has anyone any idea how i could bind the TX16S with the K-8X?

Thanks in advance ;) .


KiwiCraigNZ
Posts: 2
Joined: Sun Jul 11, 2021 9:29 am
Country: -

Re: KDS receiver K-8X binding to TX16S radio

Post by KiwiCraigNZ » Sun Jul 11, 2021 9:30 am

uses the cc2500 chip but has not yet been decoded. try looking for protocols that use CC2500

KiwiCraigNZ
Posts: 2
Joined: Sun Jul 11, 2021 9:29 am
Country: -

Re: KDS receiver K-8X binding to TX16S radio

Post by KiwiCraigNZ » Sun Jul 11, 2021 9:40 am

try Frsky, S-FHSS (futaba) or skyartec; they all use the CC2500 chip tat is used in the K-8X

Hoek771
Posts: 1
Joined: Fri Jul 23, 2021 4:15 pm
Country: -

Re: KDS receiver K-8X binding to TX16S radio

Post by Hoek771 » Fri Jul 23, 2021 4:22 pm

Hallo,

De KDS k8x 2 heb ik gebonden via het Corona v2 protocol.

1. Zet je Tx16s klaar om te binden
2. Doe de bind plug in de k8x (rx) en zet m aan
3. Klik op bind op je zender. De rx knippert een paar keer.
4. Haal dan de bind plug eruit
5. Rx uitzetten.

Klaar.

Bij mij bind ie normaal zoals het hoort.

Doe wel altijd een range test, geldt voor elke opstelling.

Succes.


Post Reply

Return to “Other Radios”