X9D+ ixjt module replacement with xht module

Hardware help and support for the FrSky Taranis
Post Reply
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

X9D+ ixjt module replacement with xht module

Post by OctavioS »

Hi all, with my x9d+ internal module gone bad, what's the chance of adding a frsky xht module and setting it up from the software? Is that possible?
Thx.
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.

User avatar
MikeB
9x Developer
Posts: 17990
Joined: Tue Dec 27, 2011 1:24 pm
Country: -
Location: Poole, Dorset, UK

Re: X9D+ ixjt module replacement with xht module

Post by MikeB »

The XHT is basically the same module as the XJT in a X9D or X9D+ (pre 2019), so should work OK.

Mike
erskyTx/er9x developer
The difficult we do immediately,
The impossible takes a little longer!
User avatar
OctavioS
Posts: 657
Joined: Sun Aug 17, 2014 11:54 pm
Country: Portugal
Location: Madeira

Re: X9D+ ixjt module replacement with xht module

Post by OctavioS »

Ok, so that means that it is possible to configure or chose options (d8, d16 or LR12) via the menu, replacing the dip switches?
2x - Turnigy 9X with 9xtreme board;
2x - Turnigy 9XRpro ;
Frsky Taranis & Taranis +;
Horus x10s;
Horus x12s;
Radiomaster TX16S Max mark II.

Post Reply

Return to “FrSky Taranis radio”